65735
28
Zoom out
Zoom in
Previous page
1/66
Next page
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light
emission on the screen. Playing a DVD or a game console may cause a similar effect to the
screen. Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce
partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still
images.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
WARNINGS:
Image retention, commonly known as screen burn-in, can occur on most types of television if the same
image is displayed continuously. The most common causes of image retention are logos that remain
stationary on the TV screen. These logos are common on many programmes received via a Setop Box.
To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast
settings to decrease the intensity of the picture. Extended viewing of movies and programs in aspect
ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour
to avoid black borders top or bottom by using the zoom function. This will help eliminate the black
borders and t the picture to the entire area of the screen. Using a video game console may cause
image retention and is not recommended. When using a PC input, avoid displaying still images for long
durations and reduce the brightness or contrast settings to decrease the intensity of the picture.
IMPORTANT:
Image retention issues are not covered by your Samsung® warranty.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01186A-Eng-0309.indd 1 2007-03-13 �� 11:24:14
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts ........................................................ 3
Installing the Wall Mount Kit ............................... 3
Viewing the Control Panel .................................. 4
Viewing the Connection Panel ........................... 5
Viewing the Remote Control ............................... 7
Installing Batteries in the Remote Control .......... 8
Switching On and Off ......................................... 8
Placing Your Television in Standby Mode........... 8
Plug & Play ......................................................... 9
SETTING THE CHANNELS
Storing Channels Automatically ....................... 10
Storing Channels Manually ...............................11
Setting the Channel Lists ................................. 12
Activating the Child Lock .................................. 12
Sorting the Stored Channels ............................ 13
Assigning Channels Names ............................. 13
Fine Tuning Channel Reception ....................... 14
LNA (Low Noise Amplier) ............................... 14
SETTING THE PICTURE
Changing the Picture Standard ........................ 15
Adjusting the Custom Picture ........................... 15
Changing the Colour Tone................................ 16
Activating Backlight .......................................... 16
Conguring Detailed Settings on the Picture ... 17
Changing the Picture Size ................................ 18
Freezing the Current Picture ............................ 19
Selecting the Screen Mode .............................. 19
Resetting the Picture Settings to the
Factory Defaults ............................................... 19
Digital NR / Active Colour / DNIe / Movie Plus 20
Viewing the Picture In Picture (PIP) ................. 21
HDMI Black Level ............................................. 22
SETTING THE SOUND
Changing the Sound Standard ......................... 22
Adjusting the Sound Settings ........................... 23
Setting the TruSurround XT (SRS TS XT) ........ 23
Connecting Headphones .................................. 24
Selecting the Sound Mode ............................... 24
Adjusting the Volume Automatically ................. 24
Selecting the Internal Mute .............................. 25
Listening to the Sound of the Sub Picture ........ 25
Resetting the Sound Settings to the Factory
Defaults ............................................................ 26
SETTING THE TIME
Setting and Displaying the Current Time .......... 26
Setting the Sleep Timer .................................... 27
Switching the Television On and Off
Automatically .................................................... 27
FUNCTION DESCRIPTION
Choosing Your Language ................................. 28
Using Game Mode ........................................... 28
Setting the Blue Screen Mode / Selecting the
Melody ............................................................. 29
Setting the Home Theater PC .......................... 29
Setting the Light Effect (LE40N8 LE46N8). ....... 30
Using the Energy Saving Feature .................... 30
Selecting the Source ........................................ 31
Editing the Input Source Names ...................... 31
English - 1
BN68-01186A-Eng-0309.indd 1 2007-03-13 �� 11:24:14
English - 3
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control &
Batteries
(AAA x 2)
Power Cord Cover-Bottom Cleaning Cloth
Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others
if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
Installing the Wall Mount Kit
Owners Instructions
Registration Cards
BN68-01186A-Eng-0309.indd 3 2007-03-13 �� 11:24:15
English - 8
1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time. The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Installing Batteries in the Remote Control
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the front of the set.
2. Press the button on the front of the set.
You also can press the POWER button or the TV/DTV button on the remote control to turn
the TV on.
The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on the right side of the set.
When you switch the set on for the very first time, you will be asked to choose language in
which the menus are to be displayed.
4. To switch your set off, press the POWER
button again.
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
The screen is turned off and a red standby indicator appears on the front of your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or
channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for
example).
It is best to unplug the set from the mains and aerial.
Placing Your Television in Standby Mode
BN68-01186A-Eng-0309.indd 8 2007-03-13 �� 11:24:19
English - 9
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
Any functions related to Digital TV (DVB) will only work in
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please confirm with your local
dealer if you can receive DVB-T signals. Although this TV set
follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not
guaranteed. Several functions may not be available in some
countries.
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the
or
buttons.
Press the ENTER/OK
button to confirm your choice.
3. Press the
or
buttons to select “Shop” or “Home”, then the ENTER/OK button.
We recommend setting the TV to Home mode for the best picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
press the Volume button and then hold down the MENU button for five seconds on the side
panel of the TV.
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER/OK
button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the
or
button.
Press the ENTER/OK
button to confirm your choice.
6. The message “Some DTV functions may not be available. Digital Scan” is displayed.
Press the ◄ or ► button to select “Yes” or “No”, then press the ENTER/OK button.
This function is supported for all countries except for the following 6 countries: the United
Kingdom, Austria, France, Germany, Italy, Spain.
7.
The "Auto Store" menu is displayed with the "Start" selected. Press the
ENTER/OK
button.
The channel search will start and end automatically.
The DTV channel scan menu appears and the DTV channel is automatically updated.
If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER/OK button at any time to interrupt the memorization process.
For detailed descriptions about DTV channel update, refer to page 33 of this manual.
After all the available digital channels are stored, the screen to select a time zone is displayed
depending on the country.
8. Press the ENTER/OK button.
Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the
or
buttons.
Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the
or
buttons.
You can also set the hour and minute by pressing the number buttons on the remote control.
9. Press the ENTER/OK button to confirm your setting.
Plug & Play
Language
: Select your language.
Country
: Select your country.
Auto Store
: Automatically scans for and stores channels available in the local area.
Clock Set
: Sets the current time for the TV clock.
Plug & Play
Start Plug & Play.
Enter Exit
OK
Yes
:
First an ATV search is performed and then a DTV ch. auto search is performed.
No
:
Only an ATV search is performed.
BN68-01186A-Eng-0309.indd 9 2007-03-13 �� 11:24:19
English - 10
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the
or
button to select "Setup", then press the
ENTER/OK button.
2. Press the ENTER/OK button again, to select "Plug & Play".
3. The message "Start Plug & Play" is displayed.
(Refer to page 9)
- Storing Channels Automatically
- Storing Channels Manually
TV
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA : Off
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the ENTER/OK button.
2. Press the ENTER/OK
button to select "Country".
3. Select the appropriate country by pressing the
or
button.
Press the ENTER/OK button to confirm your choice.
Even though you have changed the country setting in this menu, the country setting for DTV is not
changed. Use the Plug & Play function to change the country setting for DTV.
(Refer to page 9)
4. Press the
or
button to select "Auto Store", then press the ENTER/OK button.
5. Press the ENTER/OK button.
The TV will begin memorizing all of the available channels.
Press the ENTER/OK button at any time to interrupt the memorization process and return to the
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears.
Storing Channels Automatically
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
Home Theater PC
: Off
More
Move Enter Return
Move Enter Return
Plug & Play
Start Plug & Play.
Enter Return
OK
BN68-01186A-Eng-0309.indd 10 2007-03-13 �� 11:24:20
English - 11
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER/OK button.
3. Press the ENTER/OK
button to select "Programme".
4. To assign a programme number to a channel, find the correct number by pressing the ▲ or
button and then press the ENTER/OK button.
You can also set a programme number by pressing number buttons on the remote control.
5. Press the ▲ or ▼ button to select "Colour System", then press the ENTER/OK button.
6.
Select the colour standard required by pressing the ▲ or ▼ button then, press the ENTER/OK button.
7. Press the ▲ or ▼ button to select "Sound System", then press the ENTER/OK button.
8.
Select the sound standard required by pressing the ▲ or ▼ button, then press the ENTER/OK button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the ▲ or ▼ button to select "Channel".
Press the ENTER/OK button. Select C (Air channel) or S (Cable channel) by pressing the 5 or 6
button. Press the button to select channel.
Select the required number by pressing the ▲ or ▼ button and then press the ENTER/OK button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10.
If you do not know the channel numbers, press the ▲ or ▼ button to select "Search".
Press the ENTER/OK button. Search by pressing the ▲ or ▼ button and then press the ENTER/OK button.
11. Press the ▲ or ▼ button to select "Store". Press the ENTER/OK button to select "OK".
12. Repeat steps 3 to 11 for each channel to be stored.
BN68-01186A-Eng-0309.indd 11 2007-03-13 �� 11:24:20
English - 17
You can set detailed picture settings.
1.
Press the MENU button to display the menu.
2.
Press the ENTER/OK button, to select "Picture".
3. Press the ▲ or ▼ button to select "Detailed Settings", then
press the ENTER/OK
button.
4. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER/OK
button.
Available options: Black Adjust, Dynamic Contrast, Gamma,
White Balance, My Colour Control, Edge Enhancement,
Colour Space
5.
When you are satisfied with your setting, press the
ENTER/OK button.
6.
Press the EXIT button to exit.
When the picture mode is set to Movie or Standard, Detailed
Settings can be selected.
If DNIe is Off, the Detailed Settings cannot be selected when
the Picture mode is in Standard mode.
Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma: -3 ~ 3
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.
White Balance: R Offset/G Offset/B Offset/R Gain/G Gain/B Gain/Reset
You can adjust the color temperature for more natural picture colors.
R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
My Colour Control: Pink/Green/Blue/White/Reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted colours will be reset to the factory defaults.
Edge Enhancement: Off/On
You can emphasize object boundaries.
Colour Space: Auto/Wide
You can set the color reproduction space for the input signal to Auto or Wide.
XVYCC : Off/On
Setting the xvYCC mode to On increases detail and color space when watching
movies from an external device (ie. DVD player) connected to the HDMI or
Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature.
Conguring Detailed Settings on the Picture
Picture
Mode : Movie
Contrast
100
Brightness 50
Sharpness 75
Colour
55
Tint G50 R50
Colour Tone : Cool1
Detailed Settings
Backlight : 10
More
TV
Move Enter Return
Detailed Settings
Black Adjust : Off
Dynamic Contrast
: Off
Gamma : -3
White Balance
My Colour Control
Edge Enhancement
: Off
Colour Space
: Auto 
xvYCC
: Off
Move Enter Return
BN68-01186A-Eng-0309.indd 17 2007-03-13 �� 11:24:29
English - 19
When setting the picture size to Auto Wide in a 16:9 wide TV,
you can determine the picture size you want to see the 4:3
WSS (Wide Screen Service) image or nothing. Each individual
European country requires different picture size so this func-
tion is intended for users to select it.
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select “Picture”.
2. Press the
or
button to select "Screen Mode", then press
the ENTER/OK button.
3. Select the required option by pressing the
or
button.
Press the ENTER/OK button.
Available options: 16:9, Wide Zoom, Zoom, 4:3
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnify the size of the picture vertically on screen.
4:3: Sets the picture to 4:3 normal mode.
4. Press the EXIT
button to exit.
Picture Size is available in Auto Wide mode
This function is not available in PC or Component, HDMI
mode.
Selecting the Screen Mode
Picture
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : Off
Active Colur : Off
DNle : Off
Movie Plus : Off
Reset : OK
More
16:9
Wide Zoom
Zoom
4:3
Press the STILL button to freeze a moving picture into a
still one. Press again to cancel.
Freezing the Current Picture
Move Enter Return
Picture
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR :
Off
Active Colour : Off
DNle : Off
Movie Plus : Off
Reset : OK
More
Move Enter Return
Move Enter Return
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3
on page 15.
2. Press the
or
button to select "Reset", then press the
ENTER/OK button.
3.
Press the
or
button to select "OK" or "Cancel".
Press the ENTER/OK button.
4. Press the EXIT
button to exit.
The "Reset" will be set for each picture mode.
Picture
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : Off
Active Colour : Off
DNle : Off
Movie Plus : Off
Reset : OK
More
Move Enter Return
Picture
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : Off
Active Colour : Off
DNle : Off
Movie Plus : Off
Reset : OK
More
Move Enter Return
OK
Cancel
BN68-01186A-Eng-0309.indd 19 2007-03-13 �� 11:24:32
English - 20
If the broadcast signal received by your TV is weak, you can
activate the Digital Noise Reduction feature to help reduce
any static and ghosting that may appear on the screen.
1. Press the MENU button to display the menu.
Press the ENTER/OK button, to select “Picture”.
2. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER/OK button.
Available options: Digital NR, Active Colour, DNIe, Movie
Plus.
3. When you are satisfied with your setting, press the ENTER/OK
button.
4. Press the EXIT
button to exit.
Digital NR: Off/Low/Medium/High/Auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.
This function is not available in PC mode.
Active Colour: Off/On
If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more
vivid on-screen picture.
This function is not available in PC mode.
This function is not available in Movie and Standard mode.
DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function,
you can view the difference in the visual quality.
DNIe
TM
(Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement, con-
trast enhancement and white enhancement. New image compensation Algorithm gives brighter,
clearer, more detailed image to you. DNIe
TM
technology will fit every signal into your eyes.
This function is not available in PC mode.
This function is not available in Movie mode
Movie Plus: Off/On
You can view more natural skin and clear text even in fast moving scenes.
Use this function when watching movies.
The Wide Zoom, Zoom and Just Scan mode is not supported.
This function is not available in PC mode.
Digital NR / Active Colour / DNIe / Movie Plus
Picture
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : Off
Active Colour : Off
DNle : Off
Movie Plus : Off
Reset : OK
More
Move Enter Return
BN68-01186A-Eng-0309.indd 20 2007-03-13 �� 11:24:32
English - 21
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the
or
button to select "PIP", then press the
ENTER/OK button.
3. Press the ENTER/OK
button again.
Press the
or
button to select "On", then press
ENTER/OK button.
If the PIP is activated, the size of the main picture turns
to "16:9".
4. Press the
or
button to select "Source",then press
ENTER/OK button. Select a source of the sub picture by
pressing the
or
button and press the ENTER/OK
button.
The sub picture can serve different source selections
based on what the main picture is set to.
5. Press the
or
button to select "Size" of the sub picture
and then press the ENTER/OK button. Select a size of the
sub picture by pressing the
or
button and then press the
ENTER/OK button.
If main picture is in "PC" and “Component” mode, "Size" is
not available.
6. Press the
or
button to select "Position", then press the ENTER/OK button.
Select the position of the sub picture by pressing the
or
button and then press the
ENTER/OK button.
7. Press the
or
button to select "Programme" and then press the ENTER/OK button.
You can select the channel that you want to view through sub picture by pressing the
or
button. Press the ENTER/OK button.
The "Programme" can be active when the sub picture is set to TV.
8. Press the EXIT button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the
main screen to view a game or karaoke.
Viewing the Picture In Picture (PIP)
Source: Used to select a source of the sub picture.
Size: Used to select a size of the sub picture.
Position: Used to move the sub picture.
Programme: Used to Change the sub picture.
Press the PIP button on the
remote control repeatedly to acti-
vate or deactivate the "PIP".
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
More
Energy Saving : Off
HDMI Black Level : Low
PIP
Move Enter Return
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
PIP
PIP :
On
Source : TV
Size :
Position :
Programme : P 1
Move Enter Return
O: PIP operates, X: PIP doesn’t operate
Component
HDMI
PC
TV analog
O
O
O
Ext.1
O
O
O
Ext.2
O
O
O
AV
O
O
O
S-Video
X
X
X
Component
X
X
X
HDMI
X
X
X
PC
X
X
X
TV digital
X
X
X
Sub
Main
PIP Settings
BN68-01186A-Eng-0309.indd 21 2007-03-13 �� 11:24:33
English - 22
HDMI Black Level
You can directly select the black level on the screen to adjust
the screen depth.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the
or
button to select "HDMI Black Level", then
press the ENTER/OK button.
3. Press the ▲ or ▼ button to select "Normal" or "Low", then
press the ENTER/OK
button.
4. Press the EXIT
button to exit.
This Function is active only when the externel input connects
HDMI(RGB siginal).
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
More
Energy Saving : Off
HDMI Black Level : Low
PIP
Move Enter Return
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
More
Energy Saving : Off
HDMI Black Level : Low
PIP
Move Enter Return
Normal
Low
You can select the type of the special sound effect to be used
when watching a given broadcast.
1. Press the MENU button to display the menu.
Press the
or
button to select "Sound", then press the
ENTER/OK button.
2. Press the ENTER/OK button again, to select "Mode".
3. Select the required sound effect by pressing the
or
button repeatedly and then press the ENTER/OK button.
4. Press the EXIT
button to exit.
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides live and full sound for movies.
Speech: Emphasizes voices over other sounds.
Custom: Selects your custom sound settings.
(Refer to "Adjusting the Sound Settings")
Changing the Sound Standard
Sound
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Reset
Move Enter Return
Sound
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Reset
Standard
Music
Movie
Speech
Custom
Move Enter Return
TV
TV
Normal: The screen gets brighter.
Low: The screen gets darker.
BN68-01186A-Eng-0309.indd 22 2007-03-13 �� 11:24:35
English - 23
The sound settings can be adjusted to suit your personal
preferences.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Equalizer", then press the
ENTER/OK button.
3. Press the ◄ or ► button to select a particular item.
Press the ENTER/OK button.
4. Press the ▲ or ▼ button to reach the required setting.
Press the ENTER/OK button.
5. Press the EXIT button to exit.
If you make any changes to these settings, the Sound Mode
is automatically switched to "Custom".
Adjusting the Sound Settings
Sound
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Reset
Move Enter Return
Equalizer
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Move Adjust Return
TV
TV
TruSurround XT is a patented SRS technology that solves
the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling,virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible
with all multichannel formats.
1. Press the MENU button to display the menu.
Press the
or
button to select "Sound", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "SRS TS XT", then press
the ENTER/OK button.
3. Press the ▲ or ▼ button to select "On" or "Off". Press the
ENTER/OK button.
4. Press the EXIT
button to exit.
Setting the TruSurround XT (SRS TS XT)
TruSurround XT, SRS and
symbol are
trademarks of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from
SRS Labs, Inc.
Sound
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Reset
Move Enter Return
Sound
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Reset
Off
On
Move Enter Return
TV
TV
BN68-01186A-Eng-0309.indd 23 2007-03-13 �� 11:24:37
English - 26
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated.
Selecting the Reset function after setting the equalizer resets
the equalizer setting to the factory defaults.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Reset", then press the
ENTER/OK button.
3. Press the EXIT
button to exit.
You can select this option when the "Game Mode" is set to "On".
You can set the TV’s clock so that the current time is dis-
played when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Time", then press the
ENTER/OK button.
3. Press the ENTER/OK
button to select "Clock Set".
4.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock
again.
You can also set Year, Month, Day, Hour and Minute by pressing the number buttons on the
remote control.
Setting and Displaying the Current Time
To...
Move to Month, Day, Year, Hour or Minute
Set the Month, Day, Year, Hour or Minute
Press the ENTER/OK button.
Press the...
or
button.
5
or
6
button.
Sound
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Reset
Move Enter Return
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
Home Theater PC
: Off
More
Move Enter Return
TV
Clock Set
Month
01
Day
p
q
01
2007
Year
00
Hour
00
Minute
Move Adjust Return
TV
BN68-01186A-Eng-0309.indd 26 2007-03-13 �� 11:24:41
English - 27
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Time", then press the
ENTER/OK button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press
the ENTER/OK
button.
4. Press the ▲ or ▼ button repeatedly until the desired time
appears (Off, 30, 60, 90, 120, 150, 180).
Press the ENTER/OK button.
5. Press the EXIT button to exit.
The TV automatically switches to standby mode when the
timer reaches 0.
Setting the Sleep Timer
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Time", then press the
ENTER/OK button.
3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
"Timer 3", then press the ENTER/OK button.
4. Press the ▲ or ▼ buttons to adjust “Hour”, then press the
button to move to the next step.
Set other items using the same method as above.
Yes/ No Press the ▲or▼ button
Repeat Select a Once, Everyday,
Mon-Fri, Mon-Sat, Sat-
Sun
Press the ▲or▼ button
Volume Adjust a 0~100 Press the ▲or▼ button
Programme
Adjust a Programme Press the ▲or▼ button
When finished, press the RETURN button to return.
• The current time will appear every time you press the INFO button.
You can set the hour, minute, directly by pressing the number
buttons on the remote control.
5. Press the EXIT button to exit.
Switching the Television On and Off Automatically
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
Home Theater PC
: Off
More
Move Enter Return
Time
Clock Set :
Sleep Timer :
Timer 1 :
Timer 2 :
Timer 3 :
Off
30
60
90
120
150
180
Move Enter Return
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
Home Theater PC
: Off
More
Move Enter Return
TV
Timer 1
On Time
Repeat
Once
Volume
10
01
Programme
00
5
6
00
No
:
Off Time
00 00 No
:
Move Adjust Return
TV
BN68-01186A-Eng-0309.indd 27 2007-03-13 �� 11:24:43
English - 30
This function adjusts the brightness of the TV so as to reduce
power consumption. When you watching TV at night, set the
"Energy Saving " mode option to "High" so as to reduce the
dazzling of your eyes as well as the power consumption.
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Energy Saving", then
press the ENTER/OK button.
3. Select the required option (Off, Low, Medium, High, Auto) by
pressing the ▲ or ▼ button. Press the ENTER/OK
button.
4. Press the EXIT
button to exit.
Using the Energy Saving Feature
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
More
Energy Saving : Off
HDMI Black Level
: Low
PIP
Move Enter Return
TV
Setup
More
Energy Saving : Off
HDMI Black Level
: Off
PIP
Off
Low
Medium
High
Auto
Move Enter Return
You can turn on/off the blue LED on the front of TV according
to the situation. Use it for saving power or when the LED
dazzles your eyes.
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Light Effect", then press
the ENTER/OK button.
3. Select the required option (Off, Standby Mode On,
Watching Mode On, On) by pressing the ▲ or ▼ button.
Press the ENTER/OK button.
4. Press the EXIT
button to exit.
Setting the Light Effect (LE40N8 LE46N8)
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
Home Theater PC
: Off
Light Effect :
Watching Mode On
More
Move Enter Return
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
Home Theater PC
: Off
Light Effect :
Watching Mode On
More
Move Enter Return
Off
Standby Mode On
Watching Mode On
On
Off: LED will not come on.
Standby Mode On: Turns the LED on in standby mode.
Watching Mode On: Turns the LED on while watching
TV.
On: LED will come on after you turn the TV off.
BN68-01186A-Eng-0309.indd 30 2007-03-13 �� 11:24:48
English - 31
Name the device connected to the input jacks to make your
input source selection easier.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
ENTER/OK button.
2. Press the ▲ or ▼ button to select "Edit Name", then press
the ENTER/OK button.
3. Press the
▲ or button to select the device that you wish to
edit.
Press the ENTER/OK button.
4. Press the ▲ or ▼ button to select the required device.
Press the ENTER/OK button.
5. Press the EXIT button to exit.
Editing the Input Source Names
You can select among external sources connected to your
TV’s input jacks.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the
ENTER/OK button.
2. Press the ENTER/OK button again, to select "Source List".
When no external device is connected to your
set, only "TV", "Ext.1", "Ext.2" are activated in the
"Source List". "AV", "S-Video", "Component", "PC",
"HDMI1", "HDMI2","HDMI3","DTV" are activated only
when they are connected to your set.
3. Select the required device by pressing the ▲ or ▼ button.
Press the ENTER/OK button.
Press the SOURCE button on the remote control to toggel
between all the available source.
TV mode can be selected by pressing the TV/DTV button,
number buttons(0~9), and the
P / button on the remote control. But it cannot be selected
using the SOURCE button.
Selecting the Source
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Input
Source List : TV
Edit Name
Anynet+(HDMI-CEC)
Move Enter Return
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Source List
TV
Ext.1 : ----
Ext.2 : ----
AV : ----
S-Video : ----
Component : ----
PC : ----
HDMI1 : ----
HDMI2 : ----
HDMI3 : ----
DTV : ----
Move Enter Return
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Input
Source List : TV
Edit Name
Anynet+(HDMI-CEC)
Move Enter Return
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Edit Name
Ext.1 : ----
Ext.2 : ----
AV : ----
S-Video : ----
Component : ----
PC : ----
HDMI1 : ----
HDMI2 : ----
HDMI3 : ----
----
VCR
DVD
D-VHS
Cable STB
HD STB
Satellite STB
q
Move Enter Return
BN68-01186A-Eng-0309.indd 31 2007-03-13 �� 11:24:50
English - 32
Previewing the DTV Menu System
The company does not guarantee the normal
operation of the DTV menu for countries other
than the 6 supported countries
(United Kingdom, Germany, France, Italy, Spain,
Austria) because only these country
standards are supported. In addition, when
the country of the broadcast stream differs from
the country selected by the current user, the
string appearing in the channel banner, Info,
Guide, Channel Manager, etc. may not be
displayed properly.
Available in DTV mode. Preset to the DTV mode
by using the TV/DTV button on your remote
control. To help you navigate around the on-
screen menu system and adjust the various
settings available, refer to the following illustration.
Press the D.MENU button.
The sub-items of the CI Menu may vary depending on
the CAM model.
You can select these options
by simply pressing the
D.MENU button on the
remote control.
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide : Full Guide
Move Enter Return
Channel
Auto Store
Manual Store
Edit Favourite Channels
Channel List
Move Enter Return
Setup
Menu Transparency
: Medium
Parental Lock
Subtitle : On
Subtitle Mode : Normal
Audio Format : PCM
Move Enter Return
Language
Audio Language
Subtitle Language
Teletext Language
Preference
Move Enter Exit
Move Enter Exit
Move Enter Exit
Move Enter Exit
Language
Audio Language
Subtitle Language
Teletext Language
Preference
Now/Next, Full Guide
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Channel
Auto Store
Manual Store
Edit Favourite Channels
Channel List
Setup
Menu Transparency
Parental Lock
Subtitle
Subtitle Mode
Audio Format
Digital Text
Time Zone
System
Product Information
Signal Information
Software Upgrade
Common Interface
Reset
High, Medium, Low, Opaque
Enter PIN
Off, On
Normal, Hard of hearing
Primary Audio Language
Secondary Audio Language
Primary Subtitle Language
Secondary Subtitle Language
Primary Teletext Language
Secondary Teletext Language
Disable, Enable
PCM, Dolby Digital
BN68-01186A-Eng-0309.indd 32 2007-03-13 �� 11:24:52
English - 33
Updating the Channel List Automatically
You can update the channel list when the broadcaster
adds new Services or if you move the TV to a new
location.
1. Press the D.MENU button to display the DTV menu.
2. Press the
▲ or
button to select "Channel", then press
the ENTER/OK button.
3.
Press the ENTER/OK button again, to select "Auto Store".
Press the ENTER/OK button.
4. When it has finished, the number of scanned services will
be displayed.
The existing favourite channel list will not be deleted when the channel list is updated.
To stop the scan before it has finished, press the ENTER/OK button with "STOP" selected.
5. Press the EXIT button to exit.
If the signal status is poor, the "No Service found! Check the aerial connection" message is
displayed.
Updating the Channel List Manually
You can specify the channel for a fast channel search.
1. Press the D.MENU button to display the DTV menu.
2. Press the
▲ or
button to select "Channel", then press
the ENTER/OK button.
3.
Press the
▲ or
button to select "Manual Store", then
press the ENTER/OK button.
4.
Press the
▲ or
button to select "Channel", then press
the ENTER/OK button.
• Channel: Channel "5" to "69" in sequence are displayed (depending on the country)
Frequency:
The frequency available in the Channel group is displayed.
Bandwidth:
The available bandwidths are 7 and 8 MHz.
5.
When it has finished, the number of scanned services will be displayed.
6. Press the EXIT button to exit.
Channel
65
KHz
Frequency Bandwidth
MHz
Adjust Return
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
Auto Store
Scanning for digital services...
Services found: 24 Channel: 38
35%
Stop
Return
Manual Store
474000 8
Search
BN68-01186A-Eng-0309.indd 33 2007-03-13 �� 11:24:53
English - 35
Move
1.
Press the D.MENU button to display the DTV menu.
2. Press the ▲ or button to select "Channel", then press the
ENTER/OK button.
3.
Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the ENTER/OK button.
4.
Select the required channel using the 5 or 6 button.
5.
Press the green button.
A " " icon is displayed on the left side of the channel
name.
6. Press the ▲ or button to select the channel that you want
to move, and press the green or ENTER/OK
button.
7.
Press the EXIT button to exit.
Preview
1.
In the "Edit Favourite Channels" menu,
select the channel to be previewed by pressing the ▲ or ▼
button.
2.
Press the yellow button.
The selected channel is displayed on the screen.
Delete
1. In the "Edit Favourite Channels" menu, select the channel to
be deleted from the favourite channels list by pressing the
▲ or ▼ button.
2.
Press the blue button.
The selected channel and number will be deleted.
To add a deleted channel back in to the favourite channel
list, see "Add" on page 34.
Move Enter Return
Edit Favourite Channels
2
BBC TWO
7 BBC THREE
15 abc1
Add Move Prewiew Delete
Move Enter Return
Edit Favourite Channels
2
BBC TWO
7 BBC THREE
15 abc1
Add Move Prewiew Delete
Move Enter Return
Edit Favourite Channels
2 BBC TWO
7 BBC THREE
Add Move Prewiew Delete
Move Select Return
Move Return
Move Return
BN68-01186A-Eng-0309.indd 35 2007-03-13 �� 11:24:57
English - 36
You can exclude the channels you have chosen from the
channels you have scanned.When you scan through the
stored channels, those you have chosen to skip are not
displayed. All channels that you do not specifically choose to
skip are displayed during scanning.
1.
Press the D.MENU button to display the DTV menu.
2.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER/OK button.
3.
Press the ▲ or ▼ button to select "Channel List".
Press the ENTER/OK button.
4.
Press the ▲ or ▼ button to select "All", "Favourites" or "Default".
Press the ENTER/OK button.
5.
Press the yellow button to toggle between your favourite channels and all channels.
Your favourite channels are only displayed if they were previously set in the "Editing Your
Favourite Channels" menu (refer to page 34).
6.
Press the red or green button to display the previous or next channel List page.
7.
Press the ▲ or ▼ button to select a channel to be tuned.
Press the ENTER/OK button.
The channel number, name and an icon are displayed in the top left corner while changing the
channel. The channel number and name are displayed if the channel is one of the all channels,
and a icon if the channel is one of the favourite channels.
8.
Press the blue button to toggle between your TV, Radio, Data/Other and All.
9.
Press the CH LIST button to exit from the channel List.
Selecting Channel List
While viewing a channel, additional information about the
current programme may be displayed.
1.
While viewing a programme, press the INFO button.
The programme information is displayed.
2.
To exit from banner information, press the INFO button.
Displaying Programme Information
Channel List
All Channels
23 bid-up.tv
25 TCM
26 UKTV Style
27 Discovery
28 DiscoveryH&L
15 Cartoon Nwk
33 Boomerang
55 Ttext Holidays
60 Television X
70 BBC Radio 1
72 BBC Radio 2
73 BBC Radio 3
74 BBC Radio 4
84 heat
91 MOJO
800 ARD-MHP-Data
Previous Page NextPage Favourites TV
Test Card M' v2.0
1/2
6 More
1 Test Card M'
3 Vida003b
4 Vida004b
5 vida005b
6 vida006b
15 Ch 15
16 QVC
17 UKTV Gold
Move Watch Return
Move Enter Return
14:30 Sat 1 Sep
1 AFDO,16:9
AFDO 16:9
No Block
SD
Stereo
Subtitle
English
AII Channels
14:30~14:33
A
Contains video with AFD O; coded frame
is 16:9
Exit
BN68-01186A-Eng-0309.indd 36 2007-03-13 �� 11:24:58
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung LE37M87 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung LE37M87 in the language / languages: English, Dutch as an attachment in your email.

The manual is 12,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung LE37M87

Samsung LE37M87 User Manual - German, French, Italian - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info