64976
68
Zoom out
Zoom in
Previous page
1/162
Next page
English - 66
Setting Up Anynet
+
The following settings help set the Anynet
+
functions.
To use the Anynet+ Function, Anynet
+
(HDMI-CEC) must be set to On
1.
Press the MENU button. Press the ▲ or ▼ button to select “Application”,
then press the ENTER button.
2. Press the ▲ or ▼ button to select “Anynet
+
(HDMI-CEC)”, then press the
ENTER
button.
3. Press the ENTER button to select “Anynet
+
(HDMI-CEC)”.
4.
Press the ▲ or ▼ button to select “On”, then press the ENTER button.
The “Anynet
+
(HDMI-CEC)” function is enabled.
If you select Off, “Anynet
+
(HDMI-CEC)” is disabled.
When the “Anynet
+
(HDMI-CEC)” function is disabled, all the Anynet
+
related operations are deactivated.
Setting an Anynet
+
Device to turn Off Automatically when the TV is Turned Off
1.
Press the ▲ or ▼ button to select “Auto Turn Off”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Yes”, then press the ENTER button.
The “Auto Turn Off” function is enabled.
If you select “No”, the “Auto Turn Off” function is canceled.
Press the EXIT button to exit.
The active source on the TV remote must be set to TV to use the Anynet
+
function.
If you set “Auto Turn Off” to “Yes”, connected external devices are also turned
off when the TV is turned off. If an external device is still recording, it may or
may not turn off.
Scanning and Switching between Anynet
+
Devices
1. Press the TOOLS button.
Press the ▲ or ▼ button to select “Device List”, then press the ENTER button.
Anynet
+
devices connected to the TV are listed.
If you cannot nd a device you want, press the red button to scan for devices.
2. Press the ▲ or ▼ button to select to a particular device and press the ENTER
button. It is switched to the selected device.
Only when you set “Anynet
+
(HDMI-CEC)” to On in the “Application” menu, the
“Device List” menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when
the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search
devices.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet
+
function. Make
sure to switch to an Anynet
+
device by using the TOOLS button.
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) : ON
Auto Turn Off :
Off
On
ReturnEnterMove
Application
WISELINK
Anynet+(HDMI-CEC)
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) : On
Auto Turn Off :
No
Yes
ReturnEnterMove
TOOLS
Device List
Record
Timer Recording
Receiver : Off
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
e
Exit
EnterMove
BN68-01409H-00ENG.indb 66 2008-04-28 �� 5:18:46
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung LE32A568 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung LE32A568 in the language / languages: English, French as an attachment in your email.

The manual is 28,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung LE32A568

Samsung LE32A568 User Manual - German - 104 pages

Samsung LE32A568 User Manual - Dutch - 52 pages

Samsung LE32A568 User Manual - Dutch - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info