68375
47
Zoom out
Zoom in
Previous page
1/113
Next page
English - 47
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1 Press the TOOLS button.
Press the ▲ or ▼ button to select Receiver, then press the ENTER
button.
2 Press the ◄ or ► button to select to On, then press the ENTER button.
Now you can listen to sound through the receiver.
3 Press the EXIT button to exit.
®
When the receiver (home theater) is set to On, you can hear sound
output from the TV’s Optical jack. When the TV is displaying a DTV(air)
signal, the TV will send out 5.1 channel sound to the Home theater
receiver. When the source is a digital component such as a DVD and is
connected to the TV via HDMI, only 2
channel sound will be heard from the Home Theater receiver.
®
If your receiver supports audio only, it may not appear in the device list.
®
The receiver will work when you have properly connected the Optical IN jack of the receiver to the Optical
Out jack of the TV.
®
If there is a power interruption to the TV when the Receiver is On (by disconnecting the power cord or a
power failure), the TV Speaker may be set to Off when you turn the TV on again.
Check Points before Requesting Service
Symptom Solution
Anynet
+
does not work.
Check if the device is an Anynet
+
device. The Anynet
+
system supports
Anynet
+
devices only.
Connect only one receiver.
Check if the Anynet
+
device power cord is properly connected.
Check the Anynet
+
device’s Video/Audio/HDMI cable connections.
■ Check whether Anynet
+
(HDMI-CEC) is set to On in the Anynet
+
setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet
+
exclusive remote control.
■ Anynet
+
doesn’t work at a certain condition. (Searching channels)
When connecting or removing the HDMI cable, please make sure to search
devices again or restart your TV.
Check if the Anynet
+
Function of Anynet
+
device is set on.
I want to start Anynet
+
. Check if the Anynet
+
device is properly connected to the TV and check if the
Anynet
+
(HDMI-CEC) is set to On in the Anynet
+
Setup menu.
■ Press the
TV button on the TV remote control to switch to TV. Then press the
TOOLS button to show the Anynet
+
menu and select a menu you want.
I want to exit Anynet
+
. ■ Select View TV in Anynet
+
menu.
■ Press the
SOURCE button on the TV remote control and select a device
other than Anynet
+
devices.
Press any of
CH, CH LIST, and PRE-CH to change to the
TV mode. (Note that the channel button operates only when a tuner-
embedded Anynet
+
device is not connected.)
The message Connecting to
Anynet
+
device… appears on the
screen.
You cannot use the remote control when you are configuring Anynet
+
or
switching to a view mode.
Use the remote control when the Anynet
+
setting or switching to view mode is
complete.
The Anynet
+
device does not play.
You cannot use the play function when Plug & Play is in progress.
The connected device is not
displayed.
Check whether or not the device supports Anynet
+
functions.
Check whether or not the HDMI cable is properly connected.
■ Check whether Anynet
+
(HDMI-CEC) is set to On in the Anynet
+
setup menu.
■ Search Anynet
+
devices again.
You can connect an Anynet
+
device using the HDMI cable only. Some HDMI
cables may not support Anynet
+
functions.
The TV programme cannot be
recorded.
Check whether the antenna jack on the recording device is properly
connected.
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.
Tools
Move Enter
View TV
Device List
Recording : DVD
DVD Menu
DVD Menu
Picture Mode : Dynamic
Sound Mode : Standard
Sleep Timer : Off
Exit
wOw[\WPiu]_TWX\[^hUGGG[^ YWW_TW\TX\GGG㝘䟸GZaYXaWW
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung LE26A466 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung LE26A466 in the language / languages: English as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info