68375
30
Zoom out
Zoom in
Previous page
1/113
Next page
English - 30
Resetting the Picture Settings to the Factory Defaults
1 To select the desired picture mode, follow the “Changing
the Picture Standard” instructions numbers 1 and 2. (see
page 28)
2
Press the ▲ or ▼ button to select Picture Reset, then
press the
ENTER
button.
3
Press the ▲ or ▼ button to select OK or Cancel then
press the
ENTER
button.
®
Each mode can be reset.
Screen Burn Protection
To reduce the possibility of screen burn, this unit is
equipped with screen burn prevention technology. This
technology enables you to set picture movement up/down
(Vertical Line) and side to side (Horizontal Dot). The Time
setting allows you to program the time between movement
of the picture in minutes.
Pixel Shift:
Using this function, you can minutely move
pixels on the PDP in horizontal or vertical direction to
minimize after image on the screen.
Set
Pixel Shift t
o On by pressing the or
button, then press the
ENTER
button.
Select the required option by pressing the ▲ or ▼
button, then press the
ENTER button.
Available options:
Horizontal Dot,
Vertical Line,
Time
®
Optimum condition for pixel shift;
PC
TV/Ext/AV/Component/
HDMI
Horizontal Dot 44
Vertical Line 44
Time (minute) 44
min
®
This function is not available in the Just Scan mode.
®
The Pixel Shift value may differ depending on the monitor size (inches) and mode.
All White:
This function helps remove after images on the screen by changing the colour of
pixels to white. Use this function when there are remaining after images or symbols on the screen
especially when you displayed a still image on the screen for a long time.
Scrolling:
This function helps remove after images on the screen by moving all the pixels on the
PDP according to a pattern. Use this function when there are remaining after images or symbols
on the screen especially when you displayed a still image on the screen for a long time.
Side Gray:
When you watch TV with the screen ratio of 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme left and right sides.
Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
Light:
When you set the screen ratio to 4:3, it brightens the left and right sides.
®
To remove after images on the screen, use either White or Scrolling function. Although both of
the two functions remove after images on the screen,
Scrolling
is more effective.
®
The after image removal function has to be executed for a long time (approximately 1 hour) to
effectively remove after images on the screen. If after image is not improved after the execution
of the function, repeat the function again.
®
Press any button on the remote control to cancel this feature.
Picture
Detailed Settings
Picture Options
Picture Reset
OK
Cancel
Screen Burn Protection
Pixel Shift
All
White
Scrolling
Side
Gray : Light
ReturnEnterMove
Pixel Shift
Pixel Shift : On
Horizontal
Dot : 4
Vertical Line : 4
Time : 2 min
ReturnEnterMove
wOw[\WPiu]_TWX\[^hXUGGGZW YWW_TW\TX\GGG㝘䟸G[aYWaY[
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung LE26A466 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung LE26A466 in the language / languages: English as an attachment in your email.

The manual is 3,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info