450003
38
Zoom out
Zoom in
Previous page
1/197
Next page
38
English
Advanced Features
Listening through a Receiver ¦
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of the receiver to the
DIGITAL AUDIO
OUT (OPTICAL) jack of the TV.
When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the
TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
NOTE
You can only control Anynet
x
+
devices using the TV remote control, not the buttons on the TV.
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet
x
+
device.
The Anynet
x
+
functions do not operate with other manufacturers’ products.
Troubleshooting for Anynet ¦
+
Problem Possible Solution
Anynet
+
does not work. Check if the device is an Anynet•
+
device. The Anynet+ system supports Anynet
+
devices only.
Connect only one receiver (home theatre).•
Check if the Anynet•
+
device power cord is properly connected.
Check the Anynet•
+
device’s Video/Audio/HDMI Cable connections.
Check whether Anynet•
+
(HDMI-CEC) is set to On in the Anynet
+
setup menu.
Check whether the TV remote control is in TV mode.•
Check whether it is Anynet•
+
exclusive remote control.
Anynet•
+
doesn’t work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial
setup), etc.)
When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off •
and on again.
Check if the Anynet•
+
Function of Anynet+ device is set on.
I want to start Anynet
+
. Check if the Anynet•
+
device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On
in the Anynet
+
Setup menu.
Press the • TOOLS button to display the Anynet
+
menu and select a menu you want.
I want to exit Anynet
+
. Select • View TV in the Anynet
+
menu.
Press the • SOURCE button on the TV remote control and select a device other than Anynet
+
devices.
Press • P
>
/
<
, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operates only
when a tuner-embedded Anynet+ device is not connected.)
The message “Connecting to
Anynet
+
device...” appears on the
screen.
You cannot use the remote control when you are configuring Anynet•
+
or switching to a view mode.
Use the remote control when the Anynet•
+
setting or switching to view mode is complete.
The Anynet
+
device does not play. You cannot use the play function when • Plug & Play (Initial setup) is in progress.
The connected device is not
displayed.
Check whether or not the device supports Anynet•
+
functions.
Check whether or not the HDMI Cable is properly connected.•
Check whether • Anynet+ (HDMI-CEC) is set to On in the Anynet
+
setup menu.
Search Anynet•
+
devices again.
You can connect an Anynet•
+
device using the HDMI Cable only. Some HDMI cables may not support Anynet
+
functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power •
failure, please repeat the device scan.
The TV programme cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected.•
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.•
BN68-02791AEGH_00Eng.indb 38 3/9/2010 1:06:29 PM
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung LE 37C570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung LE 37C570 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 45,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung LE 37C570

Samsung LE 37C570 User Manual - Dutch - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info