790239

Samsung Jet Bot VR30T80 series Manual

18
Zoom out
Zoom in
Previous page
1/256
Next page
English
English18
Troubleshooting
Symptom Checklist
The Jet Bot is not
working at all.
• Check if the power switch is on.
• Check if the Status Indicator is on.
• Check if the Jet Bot's battery is depleted.
- When the Jet Bot’s Status Indicator turns red and stays red, place
the Jet Bot manually on the Docking Station to charge it.
• When you manually charge the Jet Bot due to complete discharge of
its battery, the buttons on the Jet Bot do not work. When charging is
partially complete (about 10-20 minutes later), the Status Indicator is
on and the buttons work again.
The Jet Bot has
stopped during
cleaning.
• When the Jet Bot’s Status Indicator turns red and stays red, place the
Jet Bot manually on the Docking Station to charge it.
• When the Jet Bot is immobilized by an obstacle such as a cord,
obstacles, threshold, a raised spot, etc., pick it up and move it away
from the obstacle.
- If any fabric or string is caught in a Driving Wheel, turn off the
power switch and remove the fabric or string before using it
again.
• Check whether the No-go Zones are set.
Suction power is weak.
• When there’s too much dust in the Dustbin, suction power may get
weakened. Turn off the power switch and empty the Dustbin.
• If the brush at the bottom of the Jet Bot is blocked by foreign matter,
turn off the power switch and remove foreign matter from the brush.
• When noise suddenly increases, turn off the power switch and empty
the Dustbin.
The Jet Bot cannot find
the Docking Station.
• Check if there’s a power failure or whether the power plug is
unplugged.
• Remove any obstacles around the Docking Station that may prevent
the Jet Bot from returning to the Docking Station.
• When there’s foreign matter on the charging terminals, charging can
be affected. Clean the foreign matter off the terminals.
The Jet Bot does not
detect the Boundary
Marker and crosses the
boundary.
• Make sure the Boundary Markers are attached as ( ) shape at
15 cm before the locations where the Jet Bot should not cross.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung Jet Bot VR30T80 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung Jet Bot VR30T80 series in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 26.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info