790239
11
Zoom out
Zoom in
Previous page
1/256
Next page
English
English 11
Before use
WARNING
• Do not use the Jet Bot near a heater or
combustible materials.
- Do not use the Jet Bot near fire or flame
such as a movable heater, a candlelight,
a desk lamp, a fireplace, etc. or in a place
where combustible materials such as
gasoline, alcohol, thinner, etc. exist.
• Make sure there are no dangerous objects
around the Jet Bot’s cleaning area to
prevent collision and unplug any electric
heaters or fans.
- The Jet Bot can be damaged or
malfunction.
• The Jet Bot is intended for household
use therefore do not use it in an attic,
basement, storage, an industrial building,
out of indoor space, places with moisture
(such as a bathroom, a laundry room), on
the table or shelves.
- The Jet Bot can be damaged or
malfunction.
• Attach the Boundary Markers to a place
where the Jet Bot may fall such as a stair
or a banister to prevent product damage
and injury.
- Please keep the Cliff Sensor clean all the
time for safety.
• Be sure the Jet Bot does not suck in or
touch any kind of liquids (water, beverage,
filth, etc.).
- The Jet Bot can be severely damaged
and it may contaminate other areas if the
wheels pass through liquid.
• Do not spill any liquids on the Docking
Station.
- There is a risk of fire or electric shock.
• Do not use the Docking Station for anything
other than its intended purposes.
- There is a risk of fire or severe damage to
the Docking Station.
• Always keep the Cliff Sensor clean for your
safety.
• As this wireless installation may cause
radio interference, it cannot provide a
service related with human safety.
CAUTION
• Insert the Dustbin before using the Jet Bot.
• When installing the Docking Station, do not
leave the cord carelessly on the floor since
the Jet Bot may get tangled by it.
• To clean all areas of your house, open all
rooms and set the No-go Zones with the
SmartThing App or attach the Boundary
Markers to the places where the Jet Bot
may get damaged such as a front door, a
veranda, a bathroom, and stairs for safety.
• Follow these recommendations for proper
automatic recharging.
- Always turn on the power of the Docking
Station.
- Install the Docking Station where the Jet
Bot can easily find.
- Do not leave any objects in front of the
Docking Station.
• Do not use the Jet Bot on black colored
floors.
- The Jet Bot may not be able to operate
normally.
• Do not place any objects within 0.5 m of
either side of the Docking Station or within
1 m of the front of the Docking Station.
• Make sure the Docking Station’s charging
contact is not damaged or have any foreign
matter on it.
• For the very low areas where the Jet Bot
may get stuck, set the No-go Zones with
the SmartThing App or attach the Boundary
Markers to prevent the Jet Bot from getting
in.
• Do not install the Docking Station in an area
with a dark floor.
- If the floor around the Docking Station is
dark, recharging is hindered.
• Move any obstacles that may disturb the
Jet Bot’s movement (such as children’s
indoor swing or slides) before cleaning.
Safety information
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung Jet Bot VR30T80 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung Jet Bot VR30T80 series in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 26.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info