790239
8
Zoom out
Zoom in
Previous page
1/256
Next page
English
English8
Operation and maintenance
A. Installation
NOTE
• Install the Docking Station in a place where
the floor and wall are level.
• If the Battery Charger cord is too long for
the installation environment, coil the power
cord around the cable management post,
then put it in the fixing groove at the rear
of the Docking Station.
B. Using the Jet Bot
B-1 Charging the Jet Bot
Charging
• Open the upper cover of the Jet Bot and
remove the white gasket.
• Remove the yellow gasket attached to the
power switch at the side of the Jet Bot and
press the power switch to turn the Jet Bot
on.
• Place the Jet Bot on the Docking Station
manually to start charging.
- Make sure the charging terminals on
the Jet Bot and the Docking Station are
aligned.
• Check the charging status.
- When charging starts, the Status Indicator
of the Jet Bot turns on (red, orange, or
yellow depending on charging progress),
it rises gradually, and changes to green
when the charging is complete.
Docking (Recharging)
• You can return the Jet Bot to the Docking
Station while cleaning to recharge.
- Press the [ ] on the Jet Bot or use the
SmartThings App to select the recharging
function.
B-2 Starting cleaning
• Press the [ ] on the Jet Bot to start
cleaning in Auto Clean.
• Press the [ ] on the Jet Bot to stop
operation while cleaning.
- When pressing the [ ], the Jet Bot
returns to the Docking Station and starts
charging.
C. Cleaning the Jet Bot
Before maintenance work, you should turn off
the power switch at the side of the Jet Bot.
C-1 Emptying and cleaning the Dustbin
• Remove the dust on the filter and the
Dustbin, clean them with water, and dry
completely in the shade.
C-2 Cleaning the brush
C-3 Cleaning the Sensor Window
• Wipe the Sensor Window with a soft cloth.
C-4 Cleaning the Driving Wheel
C-5 Cleaning the Spin Brush
• If curl or deformation occurs, cover the
Spin Brush with a hot steamed cloth for 10
seconds, then wipe the Spin Brush.
• For detailed methods of use
and cleaning, refer to the QR
code.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung Jet Bot VR30T80 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung Jet Bot VR30T80 series in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 26.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info