576220
24
Zoom out
Zoom in
Previous page
1/108
Next page
24
FUNCTIONS
SOFTWARE UPDATE
AUX
I
N
O
P
T
I
C
A
L
I
N
HDMI
I
N
HDMI
O
UT
(
T
V
)
Samsung may offer updates for the Soundbar's system
firmware in the future.
If an update is offered, you can update the firmware by
connecting a USB device with the firmware update
stored on it to the USB port on your Soundbar.
Note that if there are multiple update files, you must load
them onto the USB device singly and use them to
update the firmware one file at a time.
Please visit samsung.com or contact the Samsung call
centre to receive more information about downloading
updates files.
I nsert a USB device containing the firmware
update into the USB port on the main unit.
Updating firmware may not work properly if
audio files supported by the Soundbar are
stored in the USB storage device.
Do not disconnect the power or remove the
USB device while updates are being applied.
The main unit will turn off automatically after
completing the firmware update.
After the update, all settings are reset to their
factory default settings. We recommend you
write down your settings so that you can
easily reset them after the update. Note that
updating firmware resets the subwoofer
connection too. If connection to the
subwoofer is not re-established automatically
after the update, refer to page 15.
If the firmware fails to update, we recommend
formatting the USB device in FAT16 and
trying again.
Once the software update is completed, turn
off the product and then press and hold the
(
&
) button on the remote control for more
than 5 seconds. “INIT” appears on the
display and the unit is powered off. The
updgrade is complete.
Do not format the USB device in the NTFS
format. The Soundbar does not support the
NTFS file system.
Depending on the manufacturer, some USB
devices may not be supported.
AUTO POWER LINK
If you have connected the main unit to a TV with a
digital optical cable, set the Auto Power function ON
to have the Soundbar turn on automatically when you
turn the TV on.
AUTO POWER LINK Display
ON
ANYNET+ OFF /
POWER LINK ON
OFF
ANYNET+ ON /
POWER LINK OFF
1. Connect the Soundbar and an External Device with
an Optical cable.
2. Press the
(Function) button on the main unit’s
top panel or the SOURCE button on the remote
control to select the
D.IN
mode.
3. Press the Anynet+ button on the remote control
to toggle the Auto Power Link function on and off.
Depending on the connected device, Auto
Power Link may not function.
HW-H7500_H7501_XU_ENG_20141022.indd 24HW-H7500_H7501_XU_ENG_20141022.indd 24 2014-10-22  11:21:092014-10-22  11:21:09
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung HW-H7501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung HW-H7501 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info