Manual Samsung HT-J7500W (page 25 of 261) (English, German, Dutch, French)

576273

Zoom out

Zoom in

1/261

25 - English

Settings

6. The Network connection fail screen appears.

Use

buttons to select IP Settings, and then

press the OK button.

7. Select the IP setting field, and then set it to

Enter manually.

8. Select a network parameter to enter (IP

Address, for example), and then press

button. Use the

buttons on the remote

control to enter the numbers for the parameter.

Or use the Num keypad to enter a parameter

number. Press and hold the 123 button until

the Num pad appears on the screen. When the

Num pad appears, select a number using the

78:;

button and then press the

OK button.

Use the

buttons on the remote control

to move from entry field to entry field within a

parameter. When done with one value, press the

OK button.

9. Press the

button to move to another

parameter, and then enter the numbers for that

parameter following the instructions in Step 8.

10. Repeat Steps 8 and 9 until you have filled in all

parameters.

✎

You can get the Network parameter values from

your Internet provider.

11. When finished, select OK, and then press the

OK button. The Security screen appears.

12. On the Security screen, enter your network's

security code or pass phrase. Enter letters by

selecting a letter with the

78:;

buttons, and

then pressing the

OK button.

13. When finished, select Done at the right of the

screen, and then press the OK button. The

product verifies the network connection and

then connects to the network.

14. After the home cinema verifies the network,

select OK, and then press the OK button.

✎

You can also begin the Manual Network setup by

going to Settings > Network > Network Status.

❑

WPS(PBC)

One of the easiest ways to set up the wireless

network connection is using the WPS(PBC) function.

If your wireless router has a WPS(PBC) button, follow

these steps:

After following Steps 1 to 3 in "Configuring Your

Network Connection" on page 23:

1. In the Network Settings screen, change

Network type to Wireless. The product

searches for and then displays a list of the

available networks.

2. Scroll the list down, select WPS(PBC), and then

press the OK button.

3. Press the WPS(PBC) button on your router

within two minutes. Your product automatically

acquires all the network settings values it needs

and connects to your network after the network

connection is verified.

4. When it is done, highlight OK, and then press

the

OK button.

✎

For a WPS connection, set your wireless router’s

security encryption to AES. WEP security

encryption does not support a WPS connection.

Wi-Fi Direct

The Wi-Fi Direct function allows you to connect

Wi-Fi Direct devices to the product and each other

using a peer-to-peer network, without a wireless

router.

✎

Some Wi-Fi Direct devices may not support the

DLNA function if connected via Wi-Fi Direct. If

this is the case, change the network connection

method you used to connect the device to the

home cinema.

✎

Wi-Fi Direct transmissions can interfere with

Bluetooth signals. Before you use the Bluetooth

function, we strongly recommend that you turn off

the Wi-Fi Direct function on any device in which

it is currently on.

1. Turn on the Wi-Fi Direct device and activate its

Wi-Fi Direct function.

2. In the Home screen, select Settings, and then

press the

OK button.

3. Select Network, and then press the OK button.

4. Select Wi-Fi Direct, and then press the OK

button.

The Wi-Fi Direct devices that you can connect

the home cinema to appear.

HT-J7500W_J7750W-XU-ENG-0114.indd 25HT-J7500W_J7750W-XU-ENG-0114.indd 25 2015-01-14  4:17:502015-01-14  4:17:50

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Samsung HT-J7500W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 10,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Samsung HT-J7500W Manual

Product: