Manual Samsung HT-H7500WM (page 22 of 260) (English, German, Dutch, French)

576271

Zoom out

Zoom in

1/260

22 - English

Settings

Network Setup

When you connect this product to a network, you

can use network based applications and functions

such as Smart Hub and BD-LIVE, and upgrade the

product's software through the network connection.

For more information about accessing and using

Internet services, see the Network Services chapter

of this manual on pages 43~50. Instructions for

configuring the network connection start below.

Configuring Your Network Connection

If you didn't configure your network connection during

the initial settings procedure or you need to reset the

network connection, follow the directions below.

Before you begin, contact your Internet Service

Provider to find out if your IP address is static or

dynamic. If it is dynamic, and you have a wired

or wireless network, we recommend using the

Automatic configuration procedures described below.

If you are connecting to a wired network, connect the

product to your router using a LAN cable before you

start the configuration procedure.

To begin configuring your network connection, follow

these steps:

1. In the Home screen, select Settings, and then

press the

OK button.

2. Select Network, and then press the

OK button.

3. Select Network Settings, and then press the

OK button.

4. Go to the instructions for Wired networks

starting or the instructions for Wireless networks

starting on the next page.

Wired Network

❑

Wired – Automatic

After following Steps 1 to 3 above:

1. In the Network Settings screen, change

Network type to Wired. Then, select Connect

and press the OK button. The product detects

the wired connection, verifies the network

connection, and then connects to the network.

2. When it is done, highlight OK, and then press

OK button.

❑

Wired - Manual

If you have a static IP address or the automatic

procedure does not work, you'll need to set the

Network Settings values manually.

After following Steps 1 to 3 above:

1. In the Network Settings screen, change

Network type to Wired. Then, select Connect

and press the

OK button.

The product searches for a network, and then

displays the connection failed message.

✎

If it is possible to connect the home cinema to

your network wirelessly, select Change Network

at this point, change the Network type to

Wireless, and then go to the instructions for

wireless networks on the next page.

Network Settings

Wired network connection failed.

MAC Address XX:XX:XX:XX:XX:XX

IP Address 0. 0. 0. 0

Subnet Mask 0. 0. 0. 0

Gateway 0. 0. 0. 0

DNS Server 0. 0. 0. 0

Unable to connect to the network. Try the following: check if your IP address is set

correctly in IP Settings. Contact your Internet service provider for more information.

Change Network IP Settings Retry Close

2. Use the

buttons to select IP Settings,

and then press the OK button. The IP Settings

screen appears.

3. Select the IP setting field, and then set it to

Enter manually.

4. Select a parameter to enter (IP Address, for

example), and then press

OK. Use the

buttons on the remote control to enter the

numbers for the parameter.

Or use the Num

keypad to enter a parameter number.



Press and

hold the 123 button until the Num pad appears on

the screen. When the Num pad appears, select a

number using the

78:;

button and then press

the

button.



Use the

buttons on the

remote control to move from entry field to entry

field within a parameter. When done with one

parameter, press the

OK button.

5. Press the

button to move to another

parameter, and then enter the numbers for that

parameter following the instructions in Step 4.

6. Repeat Steps 4 and 5 until you have filled in all

parameters.

HT-H7500WM_7750WM-XU-0515.indd 22HT-H7500WM_7750WM-XU-0515.indd 22 2014-05-19  1:31:422014-05-19  1:31:42

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Samsung HT-H7500WM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Samsung HT-H7500WM Manual

Product: