461760
19
Zoom out
Zoom in
Previous page
1/79
Next page
English 19
02 Connections
CAUTION
The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and
moisture.
For optimal listening performance, make sure that the area around the wireless subwoofer location is
clear of any obstructions.
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their
hands or alien substances into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall through the duct (hole).
NOTE
If you use a device such as a microwave oven, wireless LAN Card or any other device that uses
the same frequency (5.2/5.8GHz) near the product, some sound interruption may be heard due
to interference.
The transmission distance of radio wave is about 10M, but may vary depending on your operating
environment. If a steel-concrete wall or metallic wall is between the main unit and the wireless
subwoofer, the system may not operate at all, because the radio wave cannot penetrate metal.
If you place a speaker near your TV set, screen colour may be distorted because of the magnetic fi eld
generated by the speaker. If this occurs, place the speaker away from your TV set.
If the subwoofer is not connected from the power, you will see S/W CHECK on the display panel of the
main unit.
Place the wireless subwoof
er under the main unit.
If the main unit doesn't make wireless connection, the
system needs ID Setting between the main unit and
wireless subwoofer. With the main unit turned off, press
the remote control's "0""1""3""5" number
buttons and then turn on the unit. After connect to the
power, press ID SET button on the rear of the
subwoofer for 5 seconds.
Attaching the Toroidal Ferrite Core to the Speaker Cable
Open the bigger one of two toroidal ferrite cores by pulling the lock
lever.
Arrange all the speaker cables that are connected to the subwoofer
and make two loops.
Attach the ferrite core as close as possible to the subwoofer.
Place the toroidal ferrite core on the looped speaker cable as
shown, and then press it closed it until you hear a click.
!
1.
2.
3.
ID SET
R
ID SET
L
ID SET button
HT-D7100_ELS_1227.indd 19HT-D7100_ELS_1227.indd 19 2011-12-27  1:18:422011-12-27  1:18:42
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung HT-D7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung HT-D7100 in the language / languages: English as an attachment in your email.

The manual is 4,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung HT-D7100

Samsung HT-D7100 User Manual - Dutch - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info