465156
51
Zoom out
Zoom in
Previous page
1/65
Next page
English 51
04 Basic Functions
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the
sound switches between STEREO
and MONO.
In a poor reception area, select MONO for a
clear, interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 into memory
Press the FUNCTION button to select FM.
Press the
TUNING/CH
(
)
button to select
<89.10>.
Press the TUNER MEMORY button.
NUMBER fl ashes on the display.
Press the # $ button to select
preset number.
You can select between 1 and 15 presets.
Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before
NUMBER
disappears from the display.
NUMBER
disappears from the display and
the station is stored in memory.
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the # $
button
on the remote control to select a channel.
About RDS broadcasting
Using the RDS (Radio Data System) to
receive FM stations
RDS allows FM stations to send an additional
signal along with their regular program signals.
For example, the stations send their station
names, as well as information about what type
of program they broadcast, such as sports or
music, etc.
When tuned to an FM station which provides the
RDS service, the RDS indicator lights up on the
display.
Description on RDS function
PTY (Program Type) : Displays the type of programme
currently being broadcast.
1.
2.
3.
4.
5.
6.
D
MO/ST
C
TUNER
MEMORY
PS NAME (Program Service Name) : Indicates the
name of broadcasting station and is composed of
8 characters.
RT (Radio Text) : Decodes the text broadcast by a
station (if any) and is composed of maximum 64
characters.
CT (Clock Time) : Decodes the real time clock
from the FM frequency. Some stations may not
transmit PTY, RT or CT information therefore this
may not be displayed in all cases.
TA (Traffi c Announcement) : TA ON/OFF it shows
that the traffi c announcement is in progress.
NOTE
RDS may not operate correctly if the station
tuned is not transmitting RDS signal properly
or if the signal strength is weak.
To show the RDS signals
You can see the RDS signals the station sends
on the display.
Press the RDS DISPLAY button while
listening to an FM station.
Each time you press the button, the
display change to show you the
following information : PS NAME RT CT
Frequency
PS
(Program
Service)
While searching, <PS> appears and
then the station names will be
displayed. <NO PS> appears if no
signal is sent.
RT
(RadioText)
While searching, <RT> appears and
then text messages the station sends
will be displayed. <NO RT> appears if
no signal is sent.
Frequency
Station frequency (non-RDS service)
About characters shown in the display
When the display shows PS,or RT signals,the following
characters are used.
The display window cannot differentiate upper
case and lower case letters and always uses
upper case letters.
The display window cannot show accented
letters, <A,> for instance, may stands for
accented <A’s> like <À, Â, Ä, Á, Å and Ã.>
1
RDS DISPLAY
HT-C5200_ELS_ENG_0303.indd 51HT-C5200_ELS_ENG_0303.indd 51 2010-03-03  9:26:062010-03-03  9:26:06
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung HT-C5200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung HT-C5200 in the language / languages: English as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung HT-C5200

Samsung HT-C5200 User Manual - Dutch - 65 pages

Samsung HT-C5200 User Manual - French - 65 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info