201Legal
Maintaining Water and
DustResistance
This device is rated IP68 using the Ingress Protection
rating system.
Your device has been tested in a controlled
environment and shown to be water and dust resistant
in certain circumstances (meets requirements of
classification IP68 as described by the international
standard IEC 60529 – Degrees of Protection provided
by Enclosures [IP Code]; test conditions: 15-35°C,
86-106 kPa, 5.0 feet, for 30 minutes). Despite this
classification, your device is not impervious to water
damage in any situation. It is important that all
compartments are closed tightly.
Note: If any liquid is found to have entered your device
components or an internally sealed system, this
condition will void your device warranty.
Follow these tips carefully to prevent damage to the
device.
•
Any device which uses accessible compartments
or ports that can be opened, should have these
sealed or closed tightly to prevent liquid from
entering the system.
•
Whenever your device gets wet, dry it thoroughly
with a clean, soft cloth. If your device has gotten
wet, you should dry the inside of the charging port
before inserting a power connector to charge your
device. If the charging port is not fully dry, your
device may operate abnormally. For example, it may
charge more slowly or overheat.
•
Do not expose the device to salt water or ionized
water, or to water over 5.0 feet deep for more than
30 minutes. If your device is exposed to fresh water,
dry it thoroughly with a clean, soft cloth. If the
device is exposed to any liquid other than fresh
water, rinse the device with fresh water immediately
and dry it thoroughly with a clean, soft cloth.
Failure to rinse the device in fresh water and dry it
as instructed may cause the device to suffer from
operability or cosmetic issues.