16802

Samsung FX505 Manual

37
Zoom out
Zoom in
Previous page
1/52
Next page
Using As a Telephone
The built-in handset makes your
unit double as a standard
telephone. Use it as you would
use any other telephone.
Making a Call
Using Memory Dialing
One-touch dialing and 2-digit speed
dialing are available also when making a
voice call. Refer to “Storing One-touch &
Speed Dial Numbers” on page 28.
To make a call using memory dialing :
1. Press the one-touch key for the
number you want to call.
Or, press [SPEED], then enter 2-digit
location number.
Your unit dials the telephone number
automatically and you can monitor the
dialing process through the speaker.
2. When the other party answers, pick up
the handset and speak.
If you get a busy signal or there is no
answer, press [OHD/HOLD] to end
the call.
l
Make sure there isn’t a document fed
into the unit. If there is, remove it
before dialing ; or, your fax unit dials
the number and will send the document
automatically.
l You can not use the unit as telephone
when the unit is switched OFF.
To Place a Call on Hold
Press [OHD/HOLD] to place a call on
hold during
a voice communication.
Music is not provided while the call is on
hold. The window displays [HOLD LINE].
To take the call off hold, press
[OHD/HOLD] again. The window display
returns to the standby mode.
Manual Redialing
To save time, retry a busy or unanswered
number as many times as you wish by
pressing [REDIAL/PAUSE].
1. Press [REDIAL/PAUSE]. Your unit
dials the last number you dialed and
you can monitor the dialing process
through the speaker.
2. When the other party answers, pick up
the handset and speak.
If you get a busy signal or there is no
answer, press [OHD/HOLD] to end
the call.
The unit retains the last number as long
as the power is switched on.
Switching From Pulse To
Tone
If you have pulse (rotary) service, you can
still take advantage of touch-tone services
such as alternate long-distance. To use
this feature, do the following :
1. Dial the special service’s number
using pulse dialing.
2. When the special service answers,
press [TONE] on the dial keypad.
3. Dial the remaining numbers required
by the service.
4. The unit returns to the pulse mode
after you finish the call.
Using Flash
Many special telephone services require a
switch-hook signal. The [FLASH] key
provides the electronic equivalent of this
signal.
For example, if you have call waiting (a
service available from most telephone
companies), you can put the first call on
hold and take a second incoming call on
the same line by pressing [FLASH].
Pressing [FLASH] again lets you
alternate between the two calls.
if you do not subscribe to a service that
uses a switch-hook signal, do not press
[FLASH] during a call. You might
disconnect the call.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung FX505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung FX505 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info