16802
19
Zoom out
Zoom in
Previous page
1/52
Next page
Receiving in AUTO-RCV
Mode
1. To select the AUTO-RCV mode, press
[RECEIVE MODE] repeatedly until the
indicator on the key lights and the
window displays as shown below.
2. When you get a call, the unit
automatically receives the document.
l l When a call is received from a
manual fax machine,
your unit
answers the call after several rings
which you can set through the User
Options, and sounds a fax tone to
the caller. The caller hears the tone,
and should know to press the
START key on their machine. Then
your unit receives the fax.
l When a call is received from an
automatic fax machine, your unit
automatically detects the sending fax
machine and receives the
fax
automatically.
l
If you pick up the handset before your
unit answers, the unit switches back to
TEL mode.
l
Even when a fax tone is on the line, the
unit might fail to detect it and doesn’t
receive the fax because of the line
instability.
Receiving continued
Receiving in ANS/FAX Mode
l l
To use ANS/FAX receiving mode, you
have to install an answering machine
(see page 10). This mode is not
applicable for the standard phone
Installed in EXT.TEL jack.
1. To select the ANS/FAX mode, press
[RECEIVE MODE] repeatedly until the
indicator flickers and the window
displays as shown below.
2. When a call is received, the answering
machine answers and plays the
recorded outgoing message.
If a fax tone or a certain time period of
silence is detected on the line by your
fax machine -the call automatically
switches over to the fax machine and
reception begins,
overriding
the
answering machine’s announcement.
If someone wants to speak with
you-your fax machine ignores the
call. The caller can leave a message
on the answering machine.
l
If you have troubles receiving faxes in the
ANS/FAX mode, change the silence
detection time mode as described on Page
37. This feature in the user options will
ensure fax reception when a fax tone is
not detected on the line by your fax
machine.
l
When only fax messages are received, your
answering machine may still indicate a
voice message has been left, even though
none were actually received.
l l
If the sound level of the incoming caller is
too low due to a poor telephone
connection, the fax machine and/or
answering machine may not function
properly.
l l
If the answering machine does not answer
within 6 rings for such reasons that
recording message is full on the tape or
the answering machine is switched off,
your fax unit automatically switches to the
TEL/FAX mode and takes the call
according to the steps described in
“Receiving in TEL/FAX mode.” If the
answering machine is featured with a user-
selectable ring counter, set the machine to
answer an incoming call within 4 rings.
l
When you are using the TEL mode on your
unit and an answering machine is installed,
you must make sure you switch off the
answering machine, otherwise the OGM
from the answering machine will disrupt
your telephone conversation.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung FX505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung FX505 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info