580821
13
Zoom out
Zoom in
Previous page
1/160
Next page
English - 13
02 SETTING UP
7
Sanitize
With the Sanitize option selected, the water temperature is increased to 70˚C
for high temperature sanitization.
You cannot select the Sanitize option if you select the Delicate cycle.
8
Dry+ (Child Lock)
Use this option when you want to dry your dishes more completely.
The temperature rises to 65˚C in the fi nal rinse cycle and dry time is increased.
If you select the this option, electricity consumption is increased.
*Child Lock : This option allows you to lock the buttons on the control panel -
except the Power button - so children cannot accidently start the dishwasher
by pressing the buttons on the panel. Only the Power button remains active.
To lock or unlock the buttons on the control panel, press and hold the Dry+
(Child Lock) button for three (3) seconds.
When the Power is On : Press and hold the “Dry+ (Child Lock)” button for
three (3)seconds.
When the Power is O : Push the Power button fi rst, and then press and
hold the “Dry+ (Child Lock)” button for three (3) seconds.
Child Lock remains active until you turn it o . You cannot select cycles or
options or start the dishwasher when Child Lock is on.
9
Display
Displays cycle time and remaining hours and minutes, Delay Start hours, and
check messages.
If an problem occurs during an operation, an check message is displayed with
a warning sound.
Refer to the “Troubleshooting and information codes” section on page 32.
Child Lock indicator
-
Turns on if the Child Lock is set (or the dishwasher is in the standby or
pause modes).
- Turns o while the dishwasher is operating.
- When Child Lock is on, the Child Lock indicator blinks for several
seconds if any button except the Power button is pressed.
Self Clean indicator
- Turns on when the Self Clean option is enabled (or the dishwasher is
in the standby or pause modes), but turns o while the dishwasher is
operating.
- Blinks for 5 seconds every 20 to 22 cycles.
- The cycle counter disappears when the Self Clean operation is complete
or when the dishwasher reaches the 23rd cycle without the Self Clean
cycle being used. (The Reset or Self Clean operation is not counted by
the cycle counter.)
Rinse Refi ll indicator
- Turns on if the dishwasher runs out of rinse aid (or the dishwasher is in
the standby or pause modes).
- Turns o while the dishwasher is operating.
Lack of salt indicator (*applicable models only)
- Tu
rns on when the water softener runs out of salt. (or the dishwasher is
in the standby or pause modes.)
- Turns o while the dishwasher is operating.
User Manual_DW9000H-Series-00156A-04_EN.indd 13User Manual_DW9000H-Series-00156A-04_EN.indd 13 2015-03-24  5:18:222015-03-24  5:18:22
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung DW60J9960 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung DW60J9960 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 32,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info