63787
26
Zoom out
Zoom in
Previous page
1/86
Next page
26_ connecting & setting up
connecting & setting up
White
Red
DVI adapter cable
(not supplied)
Case 2 : Connecting to a TV with DVI Jack
Using the DVI Adapter Cable, connect the HDMI OUT jack on the rear of the DVD Recorder & VCR to the
DVI IN jack of your TV.
Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD Recorder &
VCR to the AUDIO (red and white) IN jacks of your TV. Turn on the DVD Recorder & VCR and TV.
Press the input selector on your TV remote control until the DVI signal from the DVD Recorder & VCR
appears on your TV screen.
Depending on the HDMI device (TV/HDMI Receiver) you use, audio may not be supported. If TV does not support
Dolby digital/DTS, Audio output is not available when you set Digital output as Bitstream or select DTS On in Audio
setup menu. In this case, set the digital audio output to PCM or DTS off.
If you connect the HDMI cable between Samsung TV, you can operate easily DVD Recorder & VCR using the TV
remote control. (This is only available with Samsung TVs that support Anynet+(HDMI-CEC).) (See pages 39~40)
Please check the n logo (If your TV has an n logo, then it supports Anynet+ function.)
To change HDMI output resolution, see page 32.
HDMI (High Defi nition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with just a single connector.
Since HDMI is based on DVI, it is completely compatible with DVI. The only difference between HDMI and DVI is that
HDMI supports multi-channel audio.
Using HDMI, the DVD Recorder & VCR transmits a digital video and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
HDMI connection description
HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data).
-
Though the DVD Recorder & VCR uses an HDMI cable, the DVD Recorder & VCR outputs only a pure digital signal to the TV.
- If TV does not support HDCP (High-bandwidth Digital Content Protection), snow noise appears on the screen.
Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a TV is
digital. Therefore either a digital-to-analog converter (in the DVD Recorder & VCR) or an analog-to-digital converter
(in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI
technology is superior because it requires no D/A conversion and is a pure digital signal from the DVD Recorder &
VCR to your TV.
What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via HDMI from
being copied. It provides a secure digital link between a video source (PC, DVD, etc) and a display device
(TV, projector, etc). Content is encrypted at the source device to prevent unauthorized copies from being made.
J
M
01669A-VR370,375-EDC-ENG.indb 2601669A-VR370,375-EDC-ENG.indb 26 2008-04-15 오후 9:40:022008-04-15 오후 9:40:02
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung DVD-VR370 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung DVD-VR370 in the language / languages: English as an attachment in your email.

The manual is 12,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung DVD-VR370

Samsung DVD-VR370 User Manual - English - 262 pages

Samsung DVD-VR370 User Manual - German - 87 pages

Samsung DVD-VR370 User Manual - Dutch, French - 262 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info