29555
27
Zoom out
Zoom in
Previous page
1/33
Next page
GB-16 GB-17
Digital Terrestrial Receiver
GB
1.3 Manual Scanning
To tune-in new channels and weak signals, the STB has
been provided with the option “Manual Scanning” where
the channel data can be entered by the user.
After selecting the “Manual Scanning” from the Installation
Menu, the following screen will be displayed:
Select the Channel Number.
You can select the specified channel you want to find.
The followings are defined as a default, but optionally you can
choose it.
Signal Status bar shows you if it is valid.
Input the frequency of the channel you want to find.
Select the bandwidth.
You can select the value of 6, 7 or 8 MHz.
Select the Guard Interval Mode.
You can select the value of Auto, 1/32, 1/16, 1/8, or 1/4.
Select the FFT (Fast Fourier Transform) Mode.
The value of AUTO, 2K and 8K is settings automatically.
After select option, press the OK key to start the
scanning process.
1.4 Reset to Factory Defaults
This is to restore the factory set values in case the user has
encountered some problems after changing any values of
channel data and others which may be in error.
At the request window, if you press the OK key, the receiver
will be reset to factory default settings automatically.
NNoottee : This cause your previous settings to be deleted!
1.1 Select Country
To tune-in new channels, the STB has been provided with the
option “Select Country”.
Select the country where broadcasting services are provided.
After selecting the “Select Country” from the Installation Menu,
the following screen will be displayed:
Select the country which you are in.
You can select the value of ITALY, SPAIN, SWEDEN, UK,
USER, BELGIUM, GERMAN, FINLAND,orFRANCE by
using
/
key.
After select option, press the OK key to choose the nation of
broadcasting area to be served.
If you don’t want to save the changed, press EXIT key
without OK key pressed.
NNoottee : If national code is changed, all of saved programs will
be deleted.
1.2 Auto Scanning
The sub menu “Auto Scanning” will enable download of
the channels automatically from the preprogrammed load.
To download channels automatically:
You can select the specified frequency between
Start Frequency and End Frequency.
Press the OK key.
Auto Scanning menu will be displayed.
All the channels in the list will be automatically downloaded.
OPERATING THE RECEIVER OPERATING THE RECEIVER
MF68-00345A(REV1.2)_GB 4/18/05 1:27 PM Page 16
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung DTBS500F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung DTBS500F in the language / languages: English, Italian as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung DTBS500F

Samsung DTBS500F User Manual - English - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info