29596
20
Zoom out
Zoom in
Previous page
1/24
Next page
DTB-H550F
ENG-39
ENG
DTB-H550F
ENG-38
DIGITAL TERRESTRIAL HDTV RECEIVER
OPERATING THE RECEIVEROPERATING THE RECEIVER
4.2 Region Selection
You can set your region according to your location.
Select “Region Selection” in the System menu.
Select the region you want by using
or
key.
Region: New South Wales, Northern Territory,
Queens land, South Australia, Tasmania,
Victoria, and Western Australia.
Press the SELECT () key for confirmation.
Press the RETURN () key to cancel your work or go
back to the previous menu.
Press Exit to exit the menu.
NNoottee : 1. What is “Region”?: This is a function that automatically changes the system time
according to the corresponding time region.
2. In case that the STB is moved to other region, do “Channel Auto Scan” in the
Channel menu to set the new channels.
4.3 Status
If you have to contact your service provider or a service
center they might ask for information available from this
menu.
Select “Status” in the System menu.
Press the RETURN () key to cancel your work or go
back to the previous menu.
Press Exit to exit the menu.
4.4 Signal Detection
You can obtain the signal strength and reception quality
of an incoming RF channel.
Select “Signal Detection” in the System menu.
Select the RF channel you wish to view by using the
or
keys and press the SELECT () key to start
signal detection.
RF Channel Range: From 6 to 69.
Press the RETURN () key to cancel your work or go
back to the previous menu.
Press Exit to exit the menu.
NNoottee : The signal strength and reception data may not
display on the screen when the incoming signal is
poor (even when it exists), depending on the
broadcasting conditions.
4.5 Factory Reset
This is to restore the factory set values in case the user
has encountered some problems after changing any
values of channel data and others which may be in error.
Select “Factory Reset” in the System menu.
Input your PIN Code using NUMERICAL key,
then press the SELECT () key. It asks for
your confirmation.
If you want to perform a reset, press the
SELECT () key.
The receiver will automatically restart and the factory
default settings will be restored.
If you don’t want to perform a reset, press the
RETURN () key to cancel your work or go back to
the previous menu.
NNoottee : This cause your previous settings to be deleted!
0401 DTB-H550F_ENG 4/1/05 3:18 PM Page 38
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung DTBH550F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung DTBH550F in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info