《17》
Connecting to a Power Source
Using the battery
: If the camera does not turn on after you have inserted battery, please
check whether the battery are inserted with the correct polarity(+/-).
2. Insert the battery taking note of the polarity
(+ / -).
3. To close the battery chamber cover, push it
until it clicks.
Removing the battery
1. Turn off the camera power.
Open the battery chamber cover and move the
battery holder aside. The battery will be released.
2. Take out the battery and close the battery
chamber cover.
■There are 4 indicators for battery condition that are displayed on the LCD monitor.
1. Open the battery chamber cover by pushing in
the direction of the arrow.
● When the battery chamber cover is opened, do not press the battery chamber cover by
force. This may cause the battery chamber cover modification or breakage.
INFORMATION
Battery status
Battery indicator
The battery is fully
charged
Low battery capacity
(Prepare to recharge or use spare battery)
Low battery capacity
(Prepare to recharge or use spare battery)
Low battery capacity
(Prepare to recharge or use spare battery)