《46》
■You can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and print the stored images directly. Movie clips and
voice files cannot be printed.
●Connecting the Camera to a Printer
1. Slide the power switch to turn the camera power on.
2. Use the supplied USB cable to connect the camera
to the printer as shown below.
3. Turn on the printer to connect the camera to the
printer.
4. A window for selecting an external device will
display on the LCD monitor.
5. Select [PRINTER] menu by pressing the Up/ Down button and press the OK
button.
※ If you selected [COMPUTER] in Step 5, when you connect the camera to your
printer, the [CONNECTING COMPUTER] message will display and the
connection will not be established. In this case, disconnect the USB cable, and
then follow the procedure from Step 2 and onward.
PictBridge PictBridge : Picture Selection
■Select pictures to print
1. Use the LEFT and RIGHT buttons to select the
[IMAGE] menu tab.
2. Use the UP and DOWN buttons to select the
desired sub menu value, and then press the OK
button.
When [ONE PIC] is selected
: The PictBridge function will be applied only to
the picture currently displayed.
When [ALL PICS] is selected
: The PictBridge function will be applied to all pictures, excluding movie clips
and voice files.
[ When [ONE PIC] is selected ]
[ When [ALL PICS] is selected ]
- Press the Up/ Down button to select the number of prints. Maximum 30 prints.
- When you select [ONE PIC] menu, use the Left/ Right button to select another
picture and select the number of prints for another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of
prints.
●Setting the Number of Copies to Print
- Select [ONE PIC] or [ALL PICS]. A screen where you can set the number of
copies to print will appear as shown below.
00 PRINTS
EXIT:SH
00 PRINTS
MOVE PIC: SET:OK
EXIT:SH SET:OK
ONE PIC
ALL PICS
IMAGES
MOVE:
CONNECTING PRINTER
