583177
40
Zoom out
Zoom in
Previous page
1/120
Next page
4
GB
Microwave oven Installation Requirements
Requirements
The requirements for proper microwave oven operation are as follows:
Operating Voltage: 24V DC.
Breaking Voltage: Min. 21.5V, Max. 29.5V.
Battery life must be at least 45Ah at 24V .
If possible, connect the oven to a separate supply battery (a secondary battery).
Supplied Items
Microwave oven, Turntable, Terminal Post Cover (plastic cover), Install
bracket(Left/Right), 6-#5 Tap screws, 7-#4 screws and Owner’s Manual. The
battery connection power cable is not included.
Items needed for Installation
Before installing the appliance, make sure you have the following items:
6-#5 Tap screws (The length of the screw is subject to the installation
requirements.)
7-#4 Tap screws (Outer panel screws).
2 connection power cables : one red, one black(refer to the page 6 for the
length and size of the connection cables)
Power cable terminal, power cable binder, and electrical tape.
Depending on the installation location, the following tools may be required.
Stick ruler, chalk, hammer, and gimlet.
Drill and borer.
Ring/Fork type spanner set.
Crimp pincers, soldering iron.
Screw driver.
Installation
Installation Location Tips
Before installing the oven, be sure to comply with the following: The
installation location for the oven should be even, flat, and sturdy.
Do not allow humidity or heat to affect the oven.
Allow free space of about 50mm around the oven for ventilation (Fig.1).
Take the oven’s weight into account. Check whether any protective
measure such as a large support base is necessary or not.
To determine hole location, refer to the dimensions in Fig. 2 and follow the
instructions.
WARNING
When installing the oven in a vehicle, make sure that the installation location is
safe enough to avoid an injury. (including a vehicle’s sudden stop or accident).
To make a hole in an accurate location, create a mark in advance with a hammer
and punch.
Smooth any rough edges on the holes and apply rust proof treatment to them.
Remove one screw securing outer panel of microwave oven (Right side).
Attach left and right brackets to the outer panel using 8 screws(Fig.1).
Secure the microwave oven brackets to the frame which has drilled
holes(Ø 4.0~4.2) using 6 screws (Tap Screws).(Fig.2).
Fig.3 shows how the microwave should look attached to the frame.
If the electrical wiring does not work after the oven is fastened tightly, first follow
the “Electrical Wiring (Page 5-6)” instructions and then re-fasten the oven.
The oven must be fastened tightly to protect against vibration.
If do not want to use brackets, please attach 8 screws (#4x12) on left and right
side of the outer panel directly.(Fig.4)
Microwave Oven (Fig. 1)
Front of Microwave Oven (Fig. 2)
kl]]XYniUGGwG[GG~SGuGX`SGYWWZGGZaZ\Gwt
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung DE6612S-D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung DE6612S-D in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info