465986
120
Zoom out
Zoom in
Previous page
1/151
Next page
Troubleshooting_ 5
7. Carefully take the jammed paper out of the machine.
8. Lower down the scan unit gently and slowly until it completely closed.
Make sure that it is securely latched.
Be careful no to pinch your fingers!
9. Pull do
wn the fuser lever.
10. Close the rear door. Printing automatically resumes.
Understanding display messages
Messages appear on the control panel display to indicate the machine’s
status or errors. Refer to the tables below to understand the messages’ and
their meaning, and correct the problem, if necessary.
Checking display messages
If a message is not in the table, reboot the power and try the printing
job again. If the problem persists, call a service representative.
Whe
n you call for service, provide the service representative with the
contents of display message.
Some messages may not appear on the display depending on the
options or models.
[e
rror number] indicates the error number.
[tray type
] indicates the tray number.
[med
ia type] indicates the media type.
[med
ia size] indicates the media size.
[col
or] indicates the color of toner or imaging unit.
Message Meaning Suggested solutions
[COMM. Error] The machine has a
communication
problem.
Ask the sender to try
again.
[Incompatible] The machine has
received a fax from
which is registered as
a junk fax.
The received fax data
will be deleted.
Reconfirm junk fax setup
(See "Changing the fax
setup options" on
page 1).
[Line Busy] The receiving fax
machine did not
answer or the line is
already engaged.
Try again after a few
minutes.
[Line Error] Your machine cannot
connect with the
receiving fax machine
or has lost contact
because of a problem
with the phone line.
Try again. If the problem
persists, wait an hour or
so for the line to clear
and try again. Or, Turn
the ECM mode on (See
"Fax setup
(CLX-3185FN/CLX-3185
FW only)" on page 1).
BOOTP problem
Auto IP Run
The IP address
assignment is failed.
This happens when
Auto IP for BOOTP is
set in SyncThru Web
Service.
Change the IP address
assignment method to
DHCP or Static. If you do
not change this option,
the BOOTP server
continually asks to
assign the IP address.
BOOTP problem
Reconfigure DHCP
The IP address
assignment is failed.
This happens when
Auto IP for BOOTP is
not set in SyncThru
Web Service.
Change the IP address
assignment method to
DHCP or Static. If you do
not change this option,
the BOOTP server
continually asks to
assign the IP address.
120


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung CLX-3185 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung CLX-3185 serie in the language / languages: English as an attachment in your email.

The manual is 22,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung CLX-3185 serie

Samsung CLX-3185 serie User Manual - German - 174 pages

Samsung CLX-3185 serie User Manual - Dutch - 162 pages

Samsung CLX-3185 serie User Manual - French - 167 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info