465986
48
Zoom out
Zoom in
Previous page
1/151
Next page
Wireless network setup (CLX-3185FW/CLX-3185WK only)_ 2
Installing a wireless network with cables
You can install a wireless network to connect to the machine with either a
USB cable or a network cable. For most users, we recommend using a USB
cable with the program provided in the supplied software CD.
The following are two ways to install a wireless network with cables.
With a USB cab
le: You can simply set up a wireless network using the
program in the supplied software CD. Only Windows and Macintosh
operating system are supported (See "Setting a wireless network with
USB cable" on page 3).
You can also install a wireless network in Printer Settings Utility
with a USB cable after installing driver (Windows and Macintosh
operating system are supported).
With a ne
twork cable: You can set up a wireless network using the
SyncThru™ Web Service program (See "Setting a wireless network with
network cable" on page 8).
Setting a wireless network with WPS button on
the control panel
If your machine and an access point (or wireless router) support Wi-Fi
Protected Setup™(WPS), you can easily configure the wireless network
settings by pressing the WPS ( ) button on the control panel.
Items to prepare
You need to ensure you have the following items ready to use:
Check
if the access point (or wireless router) supports Wi-Fi Protected
Setup™(WPS).
Check
if your machine supports Wi-Fi Protected Setup™(WPS).
Choosing your network connection
There are two methods to connect your machine to a wireless network by
using the WPS ( ) button on the control panel.
The Push Button Configuration (PBC) method allows you to connect your
machine to a wireless network by pressing both the WPS button on the
control panel of your machine and the WPS (PBC) button on a Wi-Fi
Protected Setup™(WPS)-enabled access point (or wireless router)
respectively.
The Personal Identification Number
(PIN) method helps you connect your
machine to a wireless network by entering the supplied PIN information on a
Wi-Fi Protected Setup™(WPS)-enabled access point (or wireless router).
Factory default in your machine is PBC mo
de, which is recommended for a
typical wireless network environment.
Access point (or wireless router) that supports WPS (Wi-Fi Protected
Setup™) has the symbol shown below.
Changing WPS mode
Factory default in your machine is PBC mode. To change WPS mode,
follow the steps below.
1. Pr
ess Menu on the control panel.
2. Pre
ss the left/right arrow until Network appears and press OK.
3. Pre
ss the left/right arrow until Wireless appears and press OK.
4. Pre
ss the left/right arrow until WPS Setting appears and press OK.
5. Pre
ss the left/right arrow until the WPS mode you want appears and
press OK.
PBC mo
de: Pressing both the WPS ( ) button on the control panel
of your machine and the WPS (PBC) button on a Wi-Fi Protected
Setup™(WPS)-ena
bled access point (or wireless router)
respectively, you can easily connect your machine to a wireless
network.
PIN mod
e: Entering the supplied PIN number on a Wi-Fi Protected
Setup™(WPS)-enabled access point (or wireless router), you can
manually connect your machine to a wireless network.
6. Pres
s Stop/Clear to return to ready mode.
Setting a wireless network in PBC mode
Factory default in your machine is PBC mode.
Connecting to a wireless network in PBC mode
To connect your machine to the wireless network in PBC mode, follow
the steps below. You also need to check the WPS ( ) button on the
control panel and the messages on the display.
You can check the status of the wireless network connection (See
"Understanding the Status LED" on page 8).
1.Press the WPS ( ) button for more than two seconds on the
control panel.
2.Push WPS on AP within 02:00: The machine starts waiting for up to
two
minutes until you press the WPS (PBC) button on the access
point (or wireless router).
3. : Press the WPS (PBC) button on
the access point (or wireless
router) within two minutes.
4.Connecting: The machine is connecting to the access point (or
wireless router).
5.Connected: When the machine is successfully connected to the
wirele
ss network, the blue wireless LED light stays on.
AP SSID: After completing the wireless network connection
process, AP’s SSID information appears on the display.
If the machine fails to connect to the wireless network, the
Connecting Failed and the Wait 2 minutes for Reconnecting
messages appear in turn on the display. Then, the machine tries to
re-connect to the wireless network.
Re-connecting to a wireless network in PBC mode
If you press the WPS ( ) button on the control panel when the
wireless function is off, the machine automatically tries to re-connect to
the
access point (or wireless router) with the previously used wireless
connection settings and address.
1.Connecting: If you press the WPS ( ) button on the control panel
when the wireless function is off, the machine automatically tries to
re-conne
ct to the access point (or wireless router) with the previously
used wireless connection settings and address.
2.Connected: When the machine is successfully connected to the
wirele
ss network, the blue wireless LED light stays on.
AP SSID: After completing the wireless network connection
proce
ss, AP’s SSID information appears on the display.
If there is no previously used access point (or wireless router),
or the network settings have been changed, the Connecting
Failed and the Wait 2 minutes for Reconnecting messages
appear in turn on the display, and then the machine tries to
re-connect to the wireless network. After the second attempt to
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung CLX-3185 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung CLX-3185 serie in the language / languages: English as an attachment in your email.

The manual is 22,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung CLX-3185 serie

Samsung CLX-3185 serie User Manual - German - 174 pages

Samsung CLX-3185 serie User Manual - Dutch - 162 pages

Samsung CLX-3185 serie User Manual - French - 167 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info