465983

Samsung CLX-3170 serie Manual

32
Zoom out
Zoom in
Previous page
1/218
Next page
32 _Getting started
4. Press the left/right arrow to select the setup method you want
appears and press OK.
• Wizard: The wireless network interface card in your printer searches
for wireless networks in the area and shows the results.
• Custom: You can configure the wireless settings according to your
needs.
Wizard mode
1. The wireless network interface card on your machine searches for
wireless network in the area and shows the results.
2. Press the left/right arrow to select a network you want to use in
Search List and press OK. You can select a network using SSID.
3. When WLAN Security
None
appears on the display,
press OK to
save your selection
. go to step 6.
If you see another messages, go to the next step.
4. According to the network you select, WLAN security encryption type
will be WEP or WPA.
• In case of WEP, Press the left/right arrow to selcet Open System or
SharedKey.
- Open System: Authentication is not used, and
Encryption
may or
may not be used, depending on the need for data security. Enter
the WEP Key using number keypad after selecting Open System.
- SharedKey: Authentication is used. A device that has a proper
WEP Key can access the network. Enter the WEP Key using
number keypad after selecting SharedKey.
• In case of WPA, Enter the WPA Key using number keypad. The Key
length should be between 8 to 63 characters long.
5. Press OK.
6. Press Stop/Clear to return to ready mode.
Custom mode
1. Enter the SSID, the name that identifies a wireless network, when
Edit SSID appears on the top line of the display. SSID is case-
sensitive so you need to enter it carefully. Press OK.
2. Select the type of wireless connections. Press the left/right arrow to
select the method of
Operation Mode
you want and press OK.
•
Ad-hoc
: Allows wireless devices to communicate directly with each
other in a peer-to-peer environment. Go to step 4.
•
Infrastructure
: Allows wireless devices to communicate with each
other through an access point. Go to step 5.
3. Press the left/right arrow to select the method of
Channel
you want
and press OK. If you select
Auto
, the wireless network interface card
on your machine will automatically adjust the channels.
4. Press the left/right arrow to select the method of WLAN Security
you want and press OK.
• None: This is used when the validation of a wireless device’s identity
and data encryption are not required for your network. Open system
is used for IEEE 802.11 authentication.
•
Static WEP
:
This uses the WEP (Wired Equivalent Privacy) algorithm
suggested by IEEE 802.11 standard for security. Static WEP security
mode requires a proper WEP key for data encryption, decryption,
and IEEE 802.11 authentication. Press the left/right arrow to select
the setup method you want in Authentication and press OK.
- Open System: Authentication is not used, and encryption may or
may not be used, depending on the need for data security. Enter the
WEP Key using number keypad after selecting Open System and
then press OK.
- SharedKey: Authentication is used. A device that has a proper
WEP key can access the network. Enter the WEP Key using number
keypad after selecting SharedKey and then press OK.
• WPA-PSK or WPA2-PSK: You can select WPA-PSK or WPA2-PSK
to authenticate the print server based on WPA Pre-Shared Key. This
uses a shared secret key (generally called Pre Shared Key
passphrase) which is manually configured on the access point and
each of its clients.
a. Press OK when
WPA-PSK
or
WPA2-PSK
appears on the bottom
line of the display.
b. Press the left/right arrow to select
TKIP
or
AES
in
Encryption
and
press OK. If you select
WPA2-PSK
,
press the left/right arrow to
select
AES
or
TKIP
+
AES
in
Encryption
and press OK.
c. Enter the WPA Key using number keypad and press OK.
5. When you have finished, press Stop/Clear to return to the ready
mode. If you do not know about your wireless environment, please
ask the network administrator.
Now go to Installing the driver software.
Using SyncThru™ Web Service
Before starting wireless parameter configuration, make sure cable
connection status.
Configuring the printer’s wireless network
1. Start a web browser such as Internet Explorer, Safari or Firefox and
enter your machine’s new IP address in the browser window.
For example,
2. When the SyncThru Web Service window opens, click
Network
Settings
.
• SSID: SSID (Service Set Identifier) is a name that identifies a
wireless network. Access points and wireless devices
attempting to connect to a specific wireless network must use
the same SSID. The SSID is case-sensitive.
• WEP : WEP (Wired Equivalent Privacy) is a security protocol
preventing unauthorized access to your wireless network.
WEP encrypts the data portion of each packet exchanged on a
wireless network using a 64-bit or 128-bit WEP encryption key.
• WPA : WPA authorizes and identifies users based on a secret
key that changes automatically at regular intervals. WPA also
uses TKIP (Temporal Key Integrity Protocol) and AES
(Advanced Encryption Standard) for data encryption.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung CLX-3170 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung CLX-3170 serie in the language / languages: English as an attachment in your email.

The manual is 12,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung CLX-3170 serie

Samsung CLX-3170 serie User Manual - German - 229 pages

Samsung CLX-3170 serie User Manual - Dutch - 221 pages

Samsung CLX-3170 serie User Manual - French - 229 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info