576283

Samsung BD-J5900 Manual

13
Zoom out
Zoom in
Previous page
1/26
Next page
NOTES
✎
Be sure to select the correct Digital Output or
`
you will hear no sound or just loud noise.
If the HDMI device (AV receiver, TV) is not
`
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
Regular DVDs do not have BONUSVIEW audio
`
and Navigation Sound Effects.
Some Blu-ray Discs do not have BONUSVIEW
`
audio and Navigation Sound Effects.
If you play MPEG audio soundtracks, the audio
`
signal outputs as PCM regardless of your
Digital Output selections (PCM or Bitstream).
If your TV is not compatible with compressed
`
multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio
even though you selected Bitstream (either Re-
encoded or Unprocessed) in the setup menu.
If your TV is not compatible with PCM sampling
`
rates over 48kHz, the player may output 48kHz
downsampled PCM audio even though you set
PCM Downsampling to Off.
PCM Downsampling
Lets you choose to have 96KHz PCM signals
downsampled to 48KHz before they are
outputted to an amplifier. Choose On if your
amplifier or receiver is not compatible with a
96KHz signal.
Dynamic Range Control
Lets you apply dynamic range control to
Dolby Digital, Dolby Digital Plus, and Dolby
TrueHD audio.
Auto• : Automatically controls the dynamic
range of Dolby TrueHD audio, based
on information in the Dolby TrueHD
soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
Configuring Your Network
Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network,
connect the player to your router using a
LAN cable before you start the configuration
procedure.
If you are connecting to a wireless network,
disconnect any wired network connection
before you begin.
To begin configuring your network connection,
follow these steps:
Wired Network
Wired - Automatic
Ğ
In the Home screen, select 1. Settings, and
then press the
v
button.
Select 2. Network, and then press the
v
button.
Select 3. Network Settings, and then press
the
v
button.
Select 4. Wired in the Network Settings
screen, and then press the
v
button.
Select 5. Connect button, and then press
the
v
button. The product detects the
wired connection, verifies the network
connection and then connects to the
network.
Wired - Manual
Ğ
If you have a static IP address or the
Automatic procedure does not work, you'll
need to set the Network Settings values
manually.
Follow Steps 1 and 2 in Wired - Automatic,
and then follow these steps:
Select 1. Network Status. The player
searches for a network, and then displays
the connection failed message.
On the bottom of the screen, select 2. IP
Settings, and then press the
v
button.
The IP Settings screen appears.
Select the IP Setting field, and then press 3.
the
v
button.
Select 4. Enter manually in the IP Setting
field, and then press the
v
button.
Select a value to enter (5. IP Address, for
example), and then press the
v
button.
Use the number keypad on your remote
control to enter the numbers for the value.
Use the ◄► buttons on the remote
control to move from entry field to entry
field within a value. When done with one
value, press the
v
button.
Press the ▲ or ▼ button to move to 6.
another value, and then enter the numbers
for that value following the instructions in
Step 5.
Repeat Steps 5 and 6 until you have filled 7.
in all values.
NOTES
✎
You can get the Network values from your
`
Internet provider.
When finished entering all the values, and 8.
then press the RETURN or EXIT buttons.
The player verifies the network connection
and then connects to the network.
Off• : Leaves the dynamic range
uncompressed, letting you hear the original
sound.
On• : Turns dynamic range control on for
all three Dolby formats. Quieter sounds
are made louder and the volume of loud
sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.
Network Settings
To begin setting up the network connection
for your player, follow these steps:
In the Home menu, press the ▲▼ ◄► 1.
buttons to select Settings, and then
press the
v
button.
Press the ▲▼ buttons to select 2. Network,
and then press the
v
button.
Press the ▲▼ buttons to select 3. Network
Settings, and then press the
v
button.
Press the ▲▼ buttons to select 4. Network
Type, and then press the
v
button.
Press the ▲▼ buttons to select 5. Wired or
Wireless, and then press the
v
button.
Go to the next section.6.
13
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung BD-J5900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung BD-J5900 in the language / languages: English as an attachment in your email.

The manual is 5,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung BD-J5900

Samsung BD-J5900 User Manual - English, German - 72 pages

Samsung BD-J5900 User Manual - German - 27 pages

Samsung BD-J5900 User Manual - Dutch, French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info