603746
17
Zoom out
Zoom in
Previous page
1/21
Next page
,
e
he
d
he
Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM SOLUTION
No operation can be
performed with the remote
control.
Check the batteries in the remote control. They may need replacing.
Operate the remote control at a distance of no more than 6.1m from
the player.
Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote control to reset
it. Reinstall batteries and try to operate the remote control again.
Disc does not play.
Ensure that the disc is installed with the label side facing up.
Check the region number of the Blu-ray Disc/DVD.
Disc Menu does not
appear.
Ensure that the disc has disc menus.
The prohibition message
appears on the screen.
This message appears when an invalid button is pressed.
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g.,
angles).
You’ve requested a title or chapter number or search time that is out of
range.
Play mode differs from the
Setup Menu selection.
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot
be changed.
The Screen Ratio is fixed on your Blu-ray Disc/DVD.
This is not a problem with the player.
No audio.
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
PROBLEM SOLUTION
The screen is blank.
If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
Press the
p
button (on front panel) for more than 5 seconds with no
disc inside. All settings will revert to the factory settings.
When the factory default settings are restored, all stored user BD data
is deleted.
Forgot password.
Press the
p
button (on front panel) for more than 5 seconds with no
disc inside. All settings including the password will revert to the factory
settings.
Don’t use this unless absolutely necessary.
When the factory default settings are restored, all stored user BD data
is deleted.
The picture is noisy or
distorted.
Make sure that the disc is not dirty or scratched.
Clean the disc.
No HDMI output.
Check the connection between the TV and the HDMI jack of the player.
Check if your TV supports 576p/480p, 720p, 1080i, or 1080p HDMI
input resolutions.
Abnormal HDMI output
screen.
If random noise appears on the screen, it means that TV does not
support HDCP (High-bandwidth Digital Content Protection).
If you experience other
problems.
Go to the contents and find the section of the user manual that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
Samsung authorized service centre.
NOTES
When the factory default settings are restored, all stored user BD data is deleted.
17
BD_J4500_XU_Web_ENG_0904.indd 17BD_J4500_XU_Web_ENG_0904.indd 17 2015-09-04  5:36:472015-09-04  5:36:47
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung BD-J4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung BD-J4500 in the language / languages: English as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung BD-J4500

Samsung BD-J4500 User Manual - German - 21 pages

Samsung BD-J4500 User Manual - Dutch - 22 pages

Samsung BD-J4500 User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info