522870
16
Zoom out
Zoom in
Previous page
1/32
Next page
16
Time Zone : You can specify the time zone
that is applicable to your area.
DST : You can set DST (Daylight Saving
Time) on or off.
DivX(R) Registration
View the DivX(R) VOD Registration Code to
purchase and play DivX(R) VOD content.
NOTE
This option is not activated if you select
OK.
To activate this option, please activate the
DivX(R) Deactivation.
DivX(R) Deactivation
Select this to get a new registration code.
NOTE
You can operate this function when the DivX(R)
Registration function is deactivated.
Network
To begin setting up the network connection
for your player, follow these steps:
In the Home menu, press the ◄► buttons 1.
to select the Settings, and then press the
ENTER button.
Press the ▲▼ buttons to select 2. Network,
and then press the ENTER button.
Press the ▲▼ buttons to select 3. Network
Settings, and then press the ENTER
button.
Press the ▲▼ buttons to select 4. Network
Type, and then press the ENTER button.
Select 5. Wired, and then press the ENTER
button.
Go to the next section.6.
Network Settings
Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic,
we recommend using the Auto setting. This
is the easiest and will work in the majority of
cases. If it is static, you must use the manual
set up procedure.
Directions for wired networks are below
.
NOTE
This unit can only be connected to the Network
via a wired connection.
Wired Network
In the Network Settings menu, press the 1.
▲▼ buttons to select Network Setting,
and then press the ENTER button.
The Internet Protocol Setup screen
appears, and then press the ENTER
button.
Press the ▲▼ button, then select 2. Auto or
Manual, and then press the ENTER button.
Setting Up a Wired Connection - Auto
If you selected 1. Auto, the Network
Function acquires and fills in the values
for IP Address, Subnet Mask, etc.,
automatically.
NOTE
This process can take up to five minutes.
Display
Audio
System
Network
Language
Security
General
Support
Settings
Network Setting
Internet Protocol Setup : Auto
IP Address :
0
0
0
0
Subnet Mask :
0
0
0
0
Gateway :
0
0
0
0
DNS : Auto
DNS Server :
0
0
0
0
>
Move
"
Select
'
Return
After the Network Function has acquired 2.
the network values, press the RETURN
button. Then, run a Network Test to ensure
the player has connected to your network.
If the Network Function does not acquire 3.
the network values or you selected Manual,
go to the directions for Manual Setup.
Setting Up a Wired Connection - Manual
If the Auto Setting does not work, you’ll need
to set the Network Setting values manually.
To get the Network setting values through
most Windows computers, follow these
steps:
Right click the Network icon on the bottom 1.
right of the screen.
In the pop-up menu, click Status.2.
On the dialog that appears, click the 3.
Support tab.
On the Support tab, click the Details 4.
button.
The Network settings are displayed.
To enter the Network settings into your player,
follow these steps:
On the Internet Protocol Setup screen, 1.
press the ENTER button.
Press the ▲▼ buttons to select 2. Manual,
and then press the ENTER button.
Press the ▼ button to go to the first entry 3.
field (IP Address).
Use the number buttons on your remote 4.
to enter numbers.
When done with each field, use the ► 5.
button to move successively to the next
field.
You can also use the other arrow buttons
to move up, down, and back.
Enter the 6. IP Address, Subnet Mask,
and Gateway values.
Press the ▼ button to go to 7. DNS.
Press the ▼ button to go to the first DNS 8.
entry field. Enter the numbers as above.
Press the 9. RETURN button on your
remote.
Run a Network Test to ensure the player 10.
has connected to your network.
Network Test
Use this menu to connect to the wired
network or check whether your network
connection is working or not.
Network Status
Check whether a connection to the network
and the Internet have been established.
BD-LIVE Internet Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
Allow (All) : The Internet connection is
allowed for all BD-LIVE contents.
Allow (Valid Only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
Prohibit : No Internet connection is allowed
for any BD-LIVE content.
NOTE
What is a valid certificate?
When the player uses BD-LIVE to send the disc data
and a request to the server to certify the disc, the
server uses the transmitted data to check if the disc
is valid and sends the certificate back to the player.
The Internet connection may be restricted while
you are using BD-LIVE contents.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung BD-D5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung BD-D5100 in the language / languages: English as an attachment in your email.

The manual is 6,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung BD-D5100

Samsung BD-D5100 User Manual - English, German, Dutch, French - 111 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info