586944
51
Zoom out
Zoom in
Previous page
1/54
Next page
English-51
INSTALLATION07
2) Smart Install mode in progress
• 88 Display : Progress will be displayed in 0~99.
• LED Display : Indicator on the indoor unit display will blink in sequence and then all indicators will blink. (This will be
repeated.)
TYPE 88 Display LED Display
Indoor unit indicator
LED1
LED2
LED3
Display may be different depending on the model.
3. Smart Install mode will end.
1) Smart Install mode will take approximately 7~13 minutes. (Actual time may be different depending on the model.)
2) When Installation is successful : Smart Install mode will end with ringing sound and the air conditioner will be in
standby status. (Error message will not be displayed on the indoor unit indicator and the remote controller and
buttons on the indoor unit will work normally.)
3) When installation is not successful : Smart Install mode will end and error message will be displayed on the indoor
unit display.
1. Take necessary measures when error occurs.
- Refer to the service manual for necessary measures for each error that occurs.
2. Use the product after taking care of the error that occurs.
Error indicator
Error Measures to take by an installer
Display
LED Display
LED 1 LED 2 LED 3
/ /
Communication Error
between Indoor and outdoor
unit
1. Check the connection wire between indoor
and outdoor unit. (whether the power cable and
communication cable is crossed or not)
Error on indoor
temperature sensor
1. Check the connection of the connector
,
Error on indoor heat
exchanger
1. Check the connection of the connector
Error on indoor fan
motor
1. Check the connection of the connector
2. Remove foreign substance (Check for the
cause that restrains motor)
display and all
LED blinks
EEPROM/Option error
1. Re-set options
,
Refrigerant flow blocking
Error
1. Check if the service valve is completely open.
2. Check if there's any blockage in the refrigerant pipe
which connects indoor and outdoor unit.
3. Check for refrigerant leak.
Lack of Refrigerant (For
Inverter model only)
1. Check if sufficient amount of additional refrigerant
was charged for the pipe length that exceeds 7.5 m.
2. Check for refrigerant leak between valve and pipe
connection.
AboveLEDpatternisdisplayedwhenthere's
error is occurred on outdoor unit. Check the LED
display on outdoor unit for the details.
: Off / : Blinking / : On
SG_GOOD_A3050_IB&IM_EN_DB68-04398A_New.indd 51 8/1/2014 10:37:13 AM
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung AR5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung AR5000 in the language / languages: English as an attachment in your email.

The manual is 20,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung AR5000

Samsung AR5000 User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info