629725
6
Zoom out
Zoom in
Previous page
1/12
Next page
Quick Start
The following steps will help you set up your Expedition XP112a/XP115a loudspeakers.
1. Turn the VOLUME control on the rear panel fully counterclockwise.
2. Set the Contour switch in the out (OFF) position.
3. Turn the Power switch OFF.
4. Connect either a line-level signal from your mixer (or other source) or a microphone
to the Input jack on the Expedition XP112a/XP115a rear panel.
5. Connect the supplied power cable to the IEC socket on the back of the loudspeaker.
Plug the power cable into an AC outlet.
Note: Always make sure that the AC outlet is congured with the correct voltage as
indicated on the rear panel of the Expedition loudspeaker.
6. Switch the Expeditions Power switch to the ON position.
7. Run an audio signal from your mixer, or talk into the microphone.
8. Slowly raise the Expeditions VOLUME control until you have reached the desired
level.
9. If the volume from the speakers gets really loud, or you see the Limit indicator
blinking frequently, turn down the VOLUME control on the Expedition XP112a/
XP115a a little until the Peak indicator does not light, or only lights occasionally with
signal peaks.
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson XP112a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson XP112a in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info