629982
23
Zoom out
Zoom in
Previous page
1/32
Next page
Owner's Manual
23
XML POWERED MIXERS
Using an External Eect
Sending an Independent Mix to an External Eects Processor
If you prefer to use an external device for eects processing, you can easily connect the unit using the XML EFX bus. Fol-
low the steps below to interface your processor.
1. Set the MONITOR section MASTER control to the “0” position. Press the EFX BYPASS switch to disable the internal DSP.
2. Raise the AUX 2/EFX controls for the channels to which you want the external eect to be applied.
3. Adjust the EFX LEVEL to the “5” position.
4. Set the input level of the external eect so that the sound is not distorted, and so that the eect’s input meter does not
indicate a clipped signal.
5. Connect the output of the external eect to an available input channel. Be sure to turn the AUX 2/EFX control for that
channel all the way down. Use the channel’s VOLUME control to adjust the eect return level.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson XML410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson XML410 in the language / languages: English as an attachment in your email.

The manual is 7,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samson XML410

Samson XML410 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info