630073

Samson Wireless System Manager for Windows 95 Manual

11
Zoom out
Zoom in
Previous page
1/19
Next page
Quick Start
To Perform An RF Spectrum Analysis
Go to Spectrum Analyze Mode, either by selecting it from the Window menu, or by clicking on the
Spectrum Analyze icon in the Tool Bar. If you are using both UR6D and UR6DX receivers simultaneous-
ly, call up the Group Select dialog either by opening the Setting menu or by clicking on the Group Select
icon in the Tool Bar, then choose the frequency range (standard UR6D frequencies or “X” UR6DX
frequencies) you wish to analyze. You can opt to perform the analysis one time only or to loop it
continuously. To perform the analysis once only, choose “1 Time” from the Analyze menu, or click on the
Analyze Once icon (the left-most icon) in the Spectrum Analyze Tool Bar. To repeat the analysis
continuously, choose “Loop” from the Analyze menu, or click on the Loop Analyze icon (the center icon)
in the Spectrum Analyze Tool Bar. To stop a continuous analysis, choose “Stop” from the Analyze
menu, or click on the Stop Analyze icon (the right-most icon) in the Spectrum Analyze Tool Bar.
For more information, see pages 15 - 16 in this manual or refer to the online Help.
To Create A Channel Plan
Whenever two or more transmitters are used, there is a chance of interference. This is
because spurious emissions can spill over into adjacent channels and produce
intermodulation distortion. In order to reduce this interference, it is good practice to
carefully select the frequencies of each channel (that is, to create a good
channel plan
)
so that the spurious emissions from one channel do not clash with another. One of
WSM’s most powerful features is its ability to create a channel plan.
Here’s how to do so: From Monitor Mode, click on the Channel Plan
icon in the Tool Bar (shown above) or, from the Setup menu, select
the “Channel Plan” option. The Channel Plan dialog (shown at right)
will appear. Begin by specifying the number of channels you want to
have included in the plan. To have WSM generate a channel plan
automatically, click on Auto and then click on the Start (left-hand)
icon. The Status box will keep you apprised of WSM’s progress,
showing first that it is scanning, then planning. The Occupied box
will show which channels are found to be currently in use by
connected receivers. When the Status box shows “Finish,” a
suggested channel plan will appear in the appropriate “B,” “A,” or
“AX” Channel List box on the bottom of the dialog. To have WSM
generate a channel plan manually, click on Manual and then enter in
the Base Frequency (the lowest frequency you wish to have included
in the channel plan). A list of possible channel plans including that
frequency will then appear in the Channel Plan drop-down box. As
you select each one, the frequencies in that plan will appear in the appropriate “B,” “A,” or “AX” Channel
List box on the bottom of the dialog and will be downloaded into all connected receivers when you click
OK. For more information and tips on creating an effective channel plan, refer to WSM’s online Help.
To Get Help
You can always get immediate online assistance (in any of WSM’s screens or Modes of operation) in any
of three ways: Either press the F1 key or open the Help menu (either technique allows you to search
from a database of topics), or click on the Help icon in the Tool Bar, which automatically provides
“pop-up” information about the next function you select.
To Quit WSM
From Monitor Mode, choose “Exit” from the File menu (if you are currently in Play or Record mode, you’ll
have to Stop first). You cannot quit WSM from any other Mode. Be sure to save your data before
quitting, or it will be permanently lost.
9
Spectrum
Analyze Mode
icon
Group Select
icon
Spectrum Analyze
Tool Bar
Channel
Plan icon
Help icon
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Wireless System Manager for Windows 95 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Wireless System Manager for Windows 95 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info