629819
9
Zoom out
Zoom in
Previous page
1/20
Next page
5
Designing an Installation Plan
If you are a professional installer, you’ll probably want
to skip over this section, however if you are setting
up your system for the first time, this section can help
make your installation a little bit easier.
Before you start plugging, stripping and connecting
wires, it a good idea to have a clear installation plan. To
create your installation plan, you need to consider sev-
eral design parameters including what sound sources
will be used, if announcement paging in necessary,
which rooms need to have sound, if remote volume
control is required, which type of speakers will do the
best job for the room they are covering, and your wir-
ing plan.
Selecting the Sound Sources
If you are using multiple sound sources, you'll need
some type of mixer and for fixed installations, a zone
mixer like the Samson S zone is ideal. The S zone
provides four input channels with the ability to con-
nect up to six input sources. On input Channel’s 1 and
2 there is an input for connecting microphones with
phantom power to operate condenser type mics. The
S zone also has a special Ducking feature so when you
speak into the microphone, the volume of the music
is automatically lowered. You can connect line level
signals on all four input channels, so signals from TAPE,
CD, DVD or Karaoke players, Audio/Video TV monitors,
Radio Tuners, DJ mixers or any other line level device
can be used as a sound source. You may also be able
to connect the output from a home hi-fi receiver if it’s
equipped with a line level output. For example, in a
small to medium size restaurant, you may want back-
ground music from a CD in one room, Disco Karaoke
in another room, the ability to have a hostess paging
parties for their tables and a cook paging a waitress to
pick up an order. The Samson S zone can accomplish
all of this easily.
Creating the Audio Zones
You can create separate audio environments using up
to four S zone’s outputs, each connected to the input
on the SZ series amplifier. You can connect one or
more speakers with a total load impedance of 4 ohms
or more to the SZ Series amplifier's output. Obviously,
(or perhaps not so obviously) we call an output a zone
on the S zone, but a zone is also the area where you
want to have sound. So, think about where you want
to distribute the sound. The SZ Series amplifiers and S
zone can accomplish all of this easily. In addition, the
S zone let’s you easily connect a remote control level
for each of the zones, so you can control the volume
in the room even if the audio equipment is located
somewhere else.
Designing an Installation Plan
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson SZ1120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson SZ1120 in the language / languages: English as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info