623970

Samson SynthSeven - Professional UHF Wireless System Manual

7
Zoom out
Zoom in
Previous page
1/92
Next page
7
ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO
Quick Start
Multiple System Setup
Press and hold the power button to turn on the UR7 receiver.
Press the Menu/Select button to enter the Main Menu. Rotate the Menu/Select encoder to highlight GROUP &
CHANNEL and press the MENU/SELECT button to enter the menu.
Set each receiver to the same Group. Select GROUP and press the MENU/SELECT button. The Group letter
will start to flash. Rotate the MENU/SELECT encoder until you have selected the desired group and press the
MENU/SELECT button to set the receiver Group.
Select GROUP SCAN and press the MENU/SELECT button. The UR7 receiver will scan the selected Group for
an available channel.
Set the transmitter:
Install two fresh AA batteries into the UB7 belt pack or UH7
handheld transmitter. Press and hold the power button to turn
on the transmitter.
On the UR7 receiver scroll down to IR SET and press the
MENU/SELECT button.
Position the transmitter about 6-12” (15-30 cm) from the front
of the UR7 receiver with the transmitter’s IR window facing
the IR transmitter on the front panel of the receiver. The UH7
transmitter IR window is inside the battery compartment. The IR
windows on the UB7 is next to the LCD display.
When the transmission is complete, select BACK or press
the power button on the UR7 receiver to return to the main
performance display.
Once a transmitter and receiver pair is set, leave the transmitter
powered on and locked before scanning the group for the next available channel. This will prevent the receiver
from selecting a channel that will cause interference.
Set the performance level
Speak or sing into the microphone, or if you are using the transmitter with a connected instrument, play the
instrument at normal performance level. Slowly raise the volume of your amplifier or mixer until the desired level
is reached.
If you find the system has noticeable dropouts, reduced overall working range, or unexpected noise bursts,
change the operating channel of the system using the steps above.
01
B
Group & Channel
Group
Channel
Group Scan
IR Set
Back
05
B
Group & Channel
Group
Channel
Group Scan
IR Set
Back
B
Group & Channel
Group
Channel
Group Scan
IR Set
Back
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson SynthSeven - Professional UHF Wireless System at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson SynthSeven - Professional UHF Wireless System in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info