630008
18
Zoom out
Zoom in
Previous page
1/112
Next page
Studio GT
18
Installing the Studio GT
Windows 7 & Windows Vista
The Studio GT does not require any
special drivers or software. Just plug in
the Studio GT into a USB port on your
computer and everything is installed
automatically.
1. The first time you plug the Studio GT
into a USB port, Windows 7 and Vista
will install the universal drivers for that
port. A balloon tip will pop up, telling
you it has found the USB Audio codec
(Figure 1).
2. When it is finished installing the
drivers, it will say “Your new hardware
is installed and ready to use. This
balloon will not pop up again for the
same USB port.
3. The Studio GT becomes the Default
Device after you plug it in and defaults
to maximum volume. Double-check
this by hovering over the speaker icon
in the bottom right hand corner of the
screen. It should show Volume:100
and "Samson StudioGT".
4. If it is not the default device, you can
set it under the Sound Properties
panel in Control Panel (figure 2).
5. Select the “Recording tab. Select the
“Samson StudioGT from the list.
6. To set the gain (volume) settings.
Select the “Properties” button, then
select the “Levels” tab. The “Input
volume control should be set as close
as possible to 0 dB to get the best
dynamic range (Figure 3). If the level is
set higher than this, the noise will be
unnecessarily high. The “Input” volume
Figure 1
Figure 3
Installing the Studio GT is a simple procedure that takes just a few minutes. Since the
Studio GT is USB compliant, you can use most any PC, connect the included USB cable
and plug and play. You will be able to control your Studio GT using the standard audio
interface controls in the MAC or Windows operating system. You will find detailed
instructions on setting up Windows 7 & Vista in the following sections of this manual.
Figure 2
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Studio GT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Studio GT in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info