623996
5
Zoom out
Zoom in
Previous page
1/32
Next page
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Quick Start
1. Plug the RXD1 USB receiver into a USB jack on a
wirelessly enable Samson audio device or to a USB port
on a computer.
Note: When using the Stage XPD1 wireless system with
a computer, you must set the computer’s audio input
device to “Samson RXD Wireless Receiver”. In most
computer operating systems, an audio software must
be used to record or monitor the audio from the USB
receiver.
2. On the wireless handheld transmitter, unscrew the
bottom section of the microphone by turning it
counterclockwise and then slide it off. Place a fresh set
of AA (LR6) batteries in the transmitter battery holder,
taking care to observe the polarity markings, then
replace the cover.
3. Turn the wireless level knob on the audio device
completely counterclockwise to 0, then turn the power
of the audio device to the ON position.
4. Turn on the power to the transmitter by pressing and
holding Power switch; the indicator LED will light
amber.
5. If the handheld transmitter and receiver have not been
previously paired, press and hold the button on the
RXD1 receiver for >5 seconds, until it begins to flash.
Press and continue to hold the Power button on the
handheld transmitter until the LED indicators on both
units light steady, indicating that the receiver and
transmitter are paired and ready for operation.
6. Speak or sing into the microphone at a normal
performance level and raise the wireless level control
until the desired level is reached.
7. If you hear distortion turn down the wireless level on
the audio device. If distortion is still audible, unscrew
the microphone body and use the supplied plastic
screwdriver to turn the Gain control in the HXD1
transmitter slowly counterclockwise until the distortion
disappears.
8. Conversely, if you hear a weak, noisy signal at the
desired volume level and with the wireless level control
of the audio device is set to maximum, use the supplied
plastic screwdriver to turn the Gain control in the HXD1
transmitter slowly clockwise until the signal reaches an
acceptable level.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Stage XPD1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Stage XPD1 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info