623995
7
Zoom out
Zoom in
Previous page
1/64
Next page
ENGLISH
ESPAÑOLITALIANO FRANÇAISDEUTSCHE
1. Power Switch -Press to turn the receiver on or o.
2. Power Indicator -Lights red when the receiver is powered on.
3. Volume Controls (Channels 1-4) -Rotate to adjust the individual audio output level from
each channel’s receiver.
4. RF Indicators (Channels 1-4) -Lights green when the corresponding HT6 microphone trans-
mitter is powered on, and there is a wireless signal present and detected by the receiver.
5. Antenna -The antenna mountings allow full rotation for optimum placement. In normal
operation, both antennas should be placed in a vertical position. The antennas can be folded
inward for convenience when transporting the SR466.
SR466 Receiver Controls and Features
5
5
4
2 1
3
7 6 998
6. DC Input -Connect the supplied 12-volt, 500 mA power adapter here.
WARNING: The substitution of any other kind of power adapter can cause severe damage to
the SR466 and will void your warranty.
7. Channels 1 & 2 Outputs -Use these unbalanced ¼” jacks to connect the SR466 Channel 1
and Channel 2 receivers to the line level input of a mixer, amplifier, or other audio equip-
ment. For individual outputs, plug into both jacks, for a mixed signal of both Channel 1 and
Channel 2 receivers, only plug into one of the outputs.
8. Channels 3 & 4 Outputs -Use these unbalanced ¼” jacks to connect the SR466 Channel 3
and Channel 4 receivers to the line level input of a mixer, amplifier, or other audio equip-
ment. For individual outputs, plug into both jacks, for a mixed signal of both Channel 3 and
Channel 4 receivers, only plug into one of the outputs.
9. Mixed Output -This balanced XLR jack is the mixed output of all four receivers to connect
to a line level input of a mixer, amplifier, or other audio equipment. This output can be used
when no additional individual mixing or EQ is necessary per channel.
10. Adaptor Strain Relief -Loop the included adaptor’s cord through the
strain relief to prevent the plug from accidentally detaching from the
receiver.
7
Stage v466: Quad Vocal Wireless System
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Stage v466 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Stage v466 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info