629803
12
Zoom out
Zoom in
Previous page
1/16
Next page





























SERVO
2
0000
SERVO 300
SERVO 300
SERVO 300
SERVO 300
SERVO 300
SERVO 300
SERVO 600
SERVO 600
SERVO 600
SERVO 600
SERVO 600
SERVO 600


Safety Instructions/Consignes de sécurité/Sicherheitsvorkehrungen/Instrucciones de seguridad
ACHTUNG:
Um die Gefahr eines Brandes oder Stromschlags zu verringern, sollten
Sie dieses Gerät weder Regen noch Feuchtigkeit aussetzen.Um die Gefahr eines
Stromschlags zu verringern, sollten Sie weder Deckel noch Rückwand des Geräts ent-
fernen. Im Innern befinden sich keine Teile, die vom Anwender gewartet werden kön-
nen. Überlassen Sie die Wartung
qualifiziertem Fachpersonal.
Der Blitz mit Pfeilspitze im
gleichseitigen Dreieck soll den Anwender vor nichtisolierter “gefährlicher Spannung
im Geräteinnern warnen. Diese Spannung kann so hoch sein, dass die Gefahr eines
Stromschlags besteht. Das Ausrufezeichen im gleichseitigen Dreieck soll den Anwender
auf wichtige Bedienungs- und Wartungsan leitungen aufmerksam machen, die im mit-
gelieferten Informationsmaterial näher beschrieben werden.
Wichtige Sicherheitsvorkehrungen
1. Lesen Sie alle Anleitungen, bevor Sie das Gerät in Betrieb nehmen.
2. Bewahren Sie diese Anleitungen für den späteren Gebrauch gut auf.
3. Bitte treffen Sie alle beschriebenen Sicherheitsvorkehrungen.
4. Befolgen Sie die Anleitungen des Herstellers.
5. Benutzen Sie das Gerät nicht in der Nähe von Wasser oder Feuchtigkeit.
6. Verwenden Sie zur Reinigung des Geräts nur ein feuchtes Tuch.
7. Blockieren Sie keine Belüftungsöffnungen. Nehmen Sie den Einbau des Geräts nur
entsprechend den Anweisungen des Herstellers vor.
8. Bauen Sie das Gerät nicht in der Nähe von Wärmequellen wie Heizkörpern,
Wärmeklappen, Öfen oder anderen Geräten (inklusive Verstärkern) ein, die Hitze
erzeugen.
9. Setzen Sie die Sicherheitsfunktion des polarisierten oder geerdeten Steckers nicht
außer Kraft. Ein polarisierter Stecker hat zwei flache, unterschiedlich breite Pole. Ein
geerdeter Stecker hat zwei flache Pole und einen dritten Erdungsstift. Der breitere
Pol oder der dritte Stift dient Ihrer Sicherheit. Wenn der vorhandene Stecker nicht in
Ihre Steckdose passt, lassen Sie die veraltete Steckdose von einem Elektriker erset-
zen.
10. Schützen Sie das Netzkabel dahingehend, dass niemand darüber laufen und
es nicht geknickt werden kann. Achten Sie hierbei besonders auf Netzstecker,
Mehrfachsteckdosen und den Kabelanschluss am Gerät.
11. Ziehen Sie den Netzstecker des Geräts bei Gewittern oder längeren Betriebspausen
aus der Steckdose.
12. Überlassen Sie die Wartung qualifiziertem Fachpersonal. Eine Wartung ist not-
wendig, wenn das Gerät auf irgendeine Weise, beispielsweise am Kabel oder
Netzstecker beschädigt wurde, oder wenn Flüssigkeiten oder Objekte in das Gerät
gelangt sind, es Regen oder Feuchtigkeit ausgesetzt war, nicht mehr wie gewohnt
betrieben werden kann oder fallen gelassen wurde.
WARNING
: To reduce the risk of fire or electric shock, do not expose this unit to rain
or moisture. To reduce the hazard of electrical shock, do not remove cover or back.
No user serviceable parts inside. Please refer all servicing to qualified personnel.The
lightning flash with an arrowhead symbol within an equilateral triangle, is intended to
alert the user to the presence of uninsulated "dangerous voltage" within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons. The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.
Important Safety Instructions
1. Please read all instructions before operating the unit.
2. Keep these instructions for future reference.
3. Please heed all safety warnings.
4. Follow manufacturers instructions.
5. Do not use this unit near water or moisture.
6. Clean only with a damp cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manu-
facturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polar-
ized plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade or third prong is provided
for your safety. When the provided plug does not fit your outlet, consult an electri-
cian for replacement of the obsolete outlet.
10. Protect the power cord from being walked on and pinched particularly at plugs,
convenience receptacles and at the point at which they exit from the unit.
11. Unplug this unit during lightning storms or when unused for long periods of time.
12. Refer all servicing to qualified personnel. Servicing is required when the unit has
been damaged in any way, such as power supply cord or plug damage, or if liquid
has been spilled or objects have fallen into the unit, the unit has been exposed to
rain or moisture, does not operate normally, or has been dropped.
PRECAUCION
: Para reducir el riesgo de incendios o descargas, no permita que este
aparato quede expuesto a la lluvia o la humedad. Para reducir el riesgo de descarga
eléctrica, nunca quite la tapa ni el chasis. Dentro del aparato no hay piezas susceptibles
de ser reparadas por el usuario. Dirija cualquier reparación al servicio técnico oficial. El
símbolo del relámpago dentro del triángulo equilátero pretende advertir al usuario de
la presencia de “voltajes peligrosos no aislados dentro de la carcasa del producto, que
pueden ser de la magnitud suficiente como para constituir un riesgo de descarga eléc-
trica a las personas. El símbolo de exclamación dentro del triángulo equilátero quiere
advertirle de la existencia de importantes instrucciones de manejo y mantenimiento
(reparaciones) en los documentos que se adjuntan con este aparato.
Instrucciones importantes de seguridad
1. Lea todo este manual de instrucciones antes de comenzar a usar la unidad.
2. Conserve estas instrucciones para cualquier consulta en el futuro.
3. Cumpla con todo lo indicado en las precauciones de seguridad.
4. Observe y siga todas las instrucciones del fabricante.
5. Nunca utilice este aparato cerca del agua o en lugares húmedos.
6. Limpie este aparato solo con un trapo suave y ligeramente humedecido.
7. No bloquee ninguna de las aberturas de ventilación. Instale este aparato de acu-
erdo a las instrucciones del fabricante.
8. No instale este aparato cerca de fuentes de calor como radiadores, calentadores,
hornos u otros aparatos (incluyendo amplificadores) que produzcan calor.
9. No anule el sistema de seguridad del enchufe de tipo polarizado o con toma de
tierra. Un enchufe polarizado tiene dos bornes, uno más ancho que el otro. Uno
con toma de tierra tiene dos bornes normales y un tercero para la conexión a
tierra. El borne ancho o el tercero se incluyen como medida de seguridad. Cuando
el enchufe no encaje en su salida de corriente, llame a un electricista para que le
cambie su salida anticuada.
10. Evite que el cable de corriente quede en una posición en la que pueda ser pisado
o aplastado, especialmente en los enchufes, receptáculos y en el punto en el que
salen de la unidad.
11. Desconecte de la corriente este aparato durante las tormentas eléctricas o cuando
no lo vaya a usar durante un periodo de tiempo largo.
12. Dirija cualquier posible reparación solo al servicio técnico oficial. Deberá hacer que
su aparato sea reparado cuando esté dañado de alguna forma, como si el cable de
corriente o el enchufe están dañados, o si se han derramado líquidos o se ha intro-
ducido algún objeto dentro de la unidad, si esta ha quedado expuesta a la lluvia o
la humedad, si no funciona normalmente o si ha caído al suelo.
ATTENTION:
Pour éviter tout risque d’électrocution ou d’incendie, ne pas exposer
cet appareil à la pluie ou à l’humidité.
Pour éviter tout risque délectrocution, ne pas
ôter le couvercle ou le dos du boîtier.
Cet appareil ne contient aucune pièce rem-
plaçable par l'utilisateur. Confiez toutes les réparations à un personnel qualifié.
Le signe avec un éclair dans un triangle prévient l’utilisateur de la présence d’une
tension dangereuse et non isolée dans l’appareil. Cette tension constitue un risque
d’électrocution. Le signe avec un point d’exclamation dans un triangle prévient
l’utilisateur d’instructions importantes relatives à l’utilisation et à la maintenance du
produit.
Consignes de sécurité importantes
1. Veuillez lire toutes les instructions avant d’utiliser l’appareil.
2. Conserver ces instructions pour toute lecture ultérieure.
3. Lisez avec attention toutes les consignes de sécurité.
4. Suivez les instructions du fabricant.
5. Ne pas utiliser cet appareil près d’une source liquide ou dans un lieu humide.
6. Nettoyez l’appareil uniquement avec un tissu humide.
7. Veillez à ne pas obstruer les fentes prévues pour la ventilation de l’appareil.
Installez l’appareil selon les instructions du fabricant.
8. Ne pas installer près d’une source de chaleur (radiateurs, etc.) ou de tout équi-
pement susceptible de générer de la chaleur (amplificateurs de puissance par
exemple).
9. Ne pas retirer la terre du cordon secteur ou de la prise murale. Les fiches cana-
diennes avec polarisation (avec une lame plus large) ne doivent pas être modi-
fiées. Si votre prise murale ne correspond pas au modèle fourni, consultez votre
électricien.
10. Protégez le cordon secteur contre tous les dommages possibles (pincement,
tension, torsion,, etc.). Veillez à ce que le cordon secteur soit libre, en particulier à
sa sortie du boîtier.
11. Déconnectez l’appareil du secteur en présence d’orage ou lors de périodes
d’inutilisation prolongées.
12. Consultez un service de réparation qualifié pour tout dysfonctionnement (dom-
mage sur le cordon secteur, baisse de performances, exposition à la pluie, pro-
jection liquide dans l’appareil, introduction d’un objet dans le boîtier, etc.).
2
Introduction
Thank you for purchasing the Servo Series Power Amplifier from Samson Audio! We know you don’t like reading own-
Thank you for purchasing the Servo Series Power Amplifier from Samson Audio! We know you don’t like reading own-
Thank you for purchasing the Servo Series Power Amplifier from Samson Audio! We know you don’t like reading own-
ers manuals, but you’ve just purchased one of the finest sound reinforcement power amplifiers around, and we want
ers manuals, but you’ve just purchased one of the finest sound reinforcement power amplifiers around, and we want
to tell you about it. So, before you plug in, wed like to suggest you take just a few moments out to scan these pages.
to tell you about it. So, before you plug in, wed like to suggest you take just a few moments out to scan these pages.
We’ll make it as painless as possible, we promise—and, who knows, you might just pick up a tip or two.
We’ll make it as painless as possible, we promise—and, who knows, you might just pick up a tip or two.
The Samson Servo Series stereo power amplifiers have been designed to provide robust, clean output with low distor-
The Samson Servo Series stereo power amplifiers have been designed to provide robust, clean output with low distor-
The Samson Servo Series stereo power amplifiers have been designed to provide robust, clean output with low distor-
tion and wide dynamic range, along with the dependability demanded by the most professional audio engineers and
tion and wide dynamic range, along with the dependability demanded by the most professional audio engineers and
installers.
Their convenient 2 rack-space design is compact, and yet theres plenty of power available, with 2 x 66 Watts at 8Ω, 2
Their convenient 2 rack-space design is compact, and yet theres plenty of power available, with 2 x 66 Watts at 8Ω, 2
Their convenient 2 rack-space design is compact, and yet theres plenty of power available, with 2 x 66 Watts at 8Ω, 2
x 100 Watts at 4Ω for the Servo 200, 2 x 100 Watts at 8Ω, 2 x 150 Watts at 4Ω for the Servo 300, 2 x 225 Watts at 8Ω, 2 x
x 100 Watts at 4Ω for the Servo 200, 2 x 100 Watts at 8Ω, 2 x 150 Watts at 4Ω for the Servo 300, 2 x 225 Watts at 8Ω, 2 x
300 Watts at 4Ω for the Servo 600, over the full frequency spectrum, from 10 Hz to 55 kHz.
300 Watts at 4Ω for the Servo 600, over the full frequency spectrum, from 10 Hz to 55 kHz.
For mono applications, a Bridge mode links both channels of the amplifiers, thus providing even more single channel
For mono applications, a Bridge mode links both channels of the amplifiers, thus providing even more single channel
power, with power ratings of 200 watts for the Servo 200, 300 watts for the Servo 300, 600 watts for the Servo 600 into
power, with power ratings of 200 watts for the Servo 200, 300 watts for the Servo 300, 600 watts for the Servo 600 into
a 8 ohms load.
Input connections are available for both
Input connections are available for both
un
balanced RCA connections
and
balanced 1/4-inch TRS connections
. For
the outputs, the Servo Series amplifiers provide standard 5-way binding posts and 1/4” phone jacks. Front-panel con-
the outputs, the Servo Series amplifiers provide standard 5-way binding posts and 1/4” phone jacks. Front-panel con-
trols and displays include a power switch with LED indicator, as well as independent left and right channel input level
trols and displays include a power switch with LED indicator, as well as independent left and right channel input level
controls. To help you set the correct operating levels, the Servo Series amplifiers include front panel Signal, Peak
controls. To help you set the correct operating levels, the Servo Series amplifiers include front panel Signal, Peak
and
Protection LED indicators. There's also a
Protection LED indicators. There's also a
ten-segment Level VU meter to help you set a good operating level.
Like all serious power amplifiers, the Servo Series internal electronics are based around a serious power-core, with
Like all serious power amplifiers, the Servo Series internal electronics are based around a serious power-core, with
over-sized toroidal transformers and large extruded heat sinks. To keep the
over-sized toroidal transformers and large extruded heat sinks. To keep the
Servo Series
amplifiers running cool, their
design employs twin internal wind tunnels with forced-air cooling via two temperature-sensitive, variable speed fans,
design employs twin internal wind tunnels with forced-air cooling via two temperature-sensitive, variable speed fans,
which greatly reduce the chance of thermal and overheating problems. Multi-stage protection for power-up, over-
which greatly reduce the chance of thermal and overheating problems. Multi-stage protection for power-up, over-
heating, over-current, short circuit, low output impedance and DC voltage, assures high reliability under the most
heating, over-current, short circuit, low output impedance and DC voltage, assures high reliability under the most
demanding situations.
demanding situations.
The
The
Servo Series
Servo Series
amps are road tough with their all steel chassis and19-inch rack mount design. The
Servo Series
amplifiers are ready for a life on the road, or to make their home in a nice fixed installation.
amplifiers are ready for a life on the road, or to make their home in a nice fixed installation.
Optimized for live sound venues, houses of worship, commercial installations, and for driving small and medium-sized
Optimized for live sound venues, houses of worship, commercial installations, and for driving small and medium-sized
live PA systems, the
live PA systems, the
Servo Series
amplifiers will deliver reliable power from gig-to-gig, venue-to-venue and day-to-
night.
In these pages, you’ll find a detailed description of the many features of the Servo Series power amplifier, as well as
In these pages, you’ll find a detailed description of the many features of the Servo Series power amplifier, as well as
a guided tour through its front and rear panels, step-by-step instructions for its setup and use, and full specifications.
a guided tour through its front and rear panels, step-by-step instructions for its setup and use, and full specifications.
You’ll also find a warranty card enclosed—please don’t forget to fill it out and mail it in so that you can receive online
You’ll also find a warranty card enclosed—please don’t forget to fill it out and mail it in so that you can receive online
technical support and so we can send you updated information about these and other Samson products in the future.
technical support and so we can send you updated information about these and other Samson products in the future.
SPECIAL NOTE: Should your Servo Series ever require servicing, a
SPECIAL NOTE: Should your Servo Series ever require servicing, a
Return Authorization
number (RA) is necessary.
Without this number, the unit will not be accepted. If purchased in the United States, please call Samson at 1-800-372-
Without this number, the unit will not be accepted. If purchased in the United States, please call Samson at 1-800-372-
6766 for a Return Authorization number prior to shipping the unit. If purchased outside the United States, contact
6766 for a Return Authorization number prior to shipping the unit. If purchased outside the United States, contact
your local Samson dealer for details. Please retain the original packing materials and, if possible, return the unit in its
your local Samson dealer for details. Please retain the original packing materials and, if possible, return the unit in its
original carton and packing materials.
original carton and packing materials.
7
The Servo Series Protection Circuitry
As noted in the “Guided Tour” section of this manual, the Servo Series front-panel
Protection LED indicates the activity of the relay speaker connection circuitry. When
the Protection LED is lit, this circuitry is active, and all connected speakers are muted
(provided with no signal), thus protecting them and preventing any audible “thump
from occurring.
The following conditions will cause the Protection LED to go on:
• Initial power-up:
For approximately five seconds after initial power-up, the protec-
tion circuitry is activated and the speaker outputs are muted. If everything is operat-
ing normally, you will hear an audible click at the conclusion of this brief period, as
the protection circuitry is deactivated and the Servo Series begins delivering signal to
connected speakers (at which point you’ll hear a click). It is normal for the Protection
LED to fade gradually after the amplifier is powered off.
Overheating:
A temperature sensing device in the Servo Series will cause the protec-
tion circuitry to be activated (and the Protection LED to go on) whenever the operat-
ing temperature of the unit rises above a safe level. To guard against this problem,
make sure the Servo Series receives adequate ventilation on all sides and that both
the front and rear panels are unobstructed.
• Severe overcurrent conditions:
This occurs whenever the signal being output from the
Servo Series rises to a level above 20% THD (Total Harmonic Distortion).
• Shorted speaker cables:
This will occur if, due to faulty wiring, the hot and ground sig-
nals being output by the Servo Series are shorted to one another.
• Output impedance drops below 4 ohms
: This can occur if the Servo Series is connect-
ed to inappropriate speaker systems (see the “Setting Up and Using Your Servo Series”
section on page 6 in this manual for more information).
• DC voltage detected at speaker output
: The most likely cause of this is an internal fail-
ure.
In general, any time the Protection LED lights up (other than during the approxi-
mately five seconds following initial power-up), there is reason to be concerned. If this
occurs, turn the Servo Series off immediately and carefully check all wiring and exter-
nal devices in order to locate and correct the condition that caused the LED to light up
in the first place.
For further assistance, contact your local Samson dealer. If purchased in the United
States, you can call Samson Technical Support (1-800-372-6766) between 9 AM and 5
PM EST.
WARNING: If the Protection LED fails to go out (and you fail to hear the accom-
panying audible click) approximately five seconds after power-up, turn the
Servo Series off immediately and check all external devices and wiring for pos-
sible shorts or other defects.
8
Bridge Mode
The Servo Series provides a rear-panel switch that allows it to be used in either Stereo
or Bridge mode. When this switch is placed in the “STEREO” (down) position, the
Servo Series functions as a true stereo amplifier, where both of the two independent
amplifier channels (Channel 1 and Channel 2) can receive different input signals and
produce independent output signals. However, when the switch is placed in the
“BRIDGE” (up) position, the Channel 1 input signal is routed to both power amplifiers
bridged together, producing a single output signal of 200 watts for the Servo 200, 300
watts for the Servo 300, and 600 watts for the Servo 600.
The illustration on the right shows how this works. In Bridged mode, the polarity
(phase) of the Channel 2 output signal is reversed relative to that of the Channel 1 out-
put signal. Both channels then process the same input signal, with the speaker load
connected so that power is derived from both channels. The effective voltage swing
seen by the load is thus doubled, so that the power output is multiplied by more than
two.
When using the Servo Series in Bridge mode, be sure to connect your loudspeaker
as shown in the illustrations on page 9 (and as silkscreened on the rear panel), with
the red (+) terminal of the Channel 1 output connected to the positive input of the
speaker and the red (+) terminal of the Channel 2 output connected to the negative
input of the speaker.
Do not use the black ground (-) output terminal of either channel (the speaker
load must “float” away from the amplifier chassis).
See pages 9 in this manual for interconnection diagrams when using the Servo Series
in Bridge mode.
WARNING: Bridge mode is to be used only when the Servo Series is connected
to an 8 ohm speaker load. Use of Bridged mode with speaker loads of 4 ohms
or less can result in severe damage to the unit due to excessive heat and current
limiting and will void your warranty!
INPUT
CHANNEL
1(+) OUTPUT
CHANNEL
2(+) OUTPUT
Bridge Mode
The illustrations on this page show the required
interconnections when using the Servo Series in
Stereo and Bridged modes.
Servo Series Connections
9
+-
-+
(4 ohm min)
(4 ohm min)




+-
-+
(4 ohm min)
(4 ohm min)




+
-
-
+
+
-
+
-
(8 ohm min)
(8 ohm min)
(8 ohm min) (8 ohm min)

MPL2242
MMPL2242

Stereo Mode: (two or four speakers)
Bridged Mode: (single speaker only)
10
Specifications
Servo 200 Servo 300 Servo 600
Servo 200 Servo 300 Servo 600
Servo 200 Servo 300 Servo 600
Stereo both channel driven
8 ohms 66 Watts x 2 100 Watts x 2 225 Watts x 2
8 ohms 66 Watts x 2 100 Watts x 2 225 Watts x 2
8 ohms 66 Watts x 2 100 Watts x 2 225 Watts x 2
4 ohms 100 Watts x 2 150 Watts x 2 300 Watts x 2
4 ohms 100 Watts x 2 150 Watts x 2 300 Watts x 2
4 ohms 100 Watts x 2 150 Watts x 2 300 Watts x 2
Bridged mono
8 ohms 200 Watts 300 Watts 600 Watts
8 ohms 200 Watts 300 Watts 600 Watts
8 ohms 200 Watts 300 Watts 600 Watts
Signal to Noise Ratio (20Hz-20k) 102dB 102dB 104dB
Signal to Noise Ratio (20Hz-20k) 102dB 102dB 104dB
Signal to Noise Ratio (20Hz-20k) 102dB 102dB 104dB
Distortion(SMPTE-IM) 0.05% 0.01% 0.04%
Distortion(SMPTE-IM) 0.05% 0.01% 0.04%
Distortion(SMPTE-IM) 0.05% 0.01% 0.04%
Input sensitivity @8ohms 1.24V(4dBu) 1.24V(4dBu) 1.24V(4dBu)
Input sensitivity @8ohms 1.24V(4dBu) 1.24V(4dBu) 1.24V(4dBu)
Input sensitivity @8ohms 1.24V(4dBu) 1.24V(4dBu) 1.24V(4dBu)
Voltage Gain 32dB 33dB 34dB
Voltage Gain 32dB 33dB 34dB
Voltage Gain 32dB 33dB 34dB
Output Circuitry AB AB AB
Output Circuitry AB AB AB
Output Circuitry AB AB AB
AC Power @1/8 rated power 4ohms, max. 0.5A 0.7A 1.3A
AC Power @1/8 rated power 4ohms, max. 0.5A 0.7A 1.3A
AC Power @1/8 rated power 4ohms, max. 0.5A 0.7A 1.3A
AC Power @1/3 rated power 4ohms, max. 1.1A 1.7A 3.3A
AC Power @1/3 rated power 4ohms, max. 1.1A 1.7A 3.3A
AC Power @1/3 rated power 4ohms, max. 1.1A 1.7A 3.3A
AC Power @ rated power 4ohms, max. 3.3A 5.0A 10A
AC Power @ rated power 4ohms, max. 3.3A 5.0A 10A
AC Power @ rated power 4ohms, max. 3.3A 5.0A 10A
Distortion(typical @4 ohms)
20Hz-20kHz,10dB below rated power 0.01% 0.01% 0.03%
20Hz-20kHz,10dB below rated power 0.01% 0.01% 0.03%
20Hz-20kHz,10dB below rated power 0.01% 0.01% 0.03%
IkHz,rated power 0.1% 0.1% 0.1%
IkHz,rated power 0.1% 0.1% 0.1%
IkHz,rated power 0.1% 0.1% 0.1%
Frequency Response @8ohms 1Watt 0/-0.5dB:20Hz-20kHz,0/-3dB:5Hz-60kHz
Frequency Response @8ohms 1Watt 0/-0.5dB:20Hz-20kHz,0/-3dB:5Hz-60kHz
Frequency Response @8ohms 1Watt 0/-0.5dB:20Hz-20kHz,0/-3dB:5Hz-60kHz
Damping Factor(400Hz) 280 280 350
Damping Factor(400Hz) 280 280 350
Damping Factor(400Hz) 280 280 350
Input Impedance 15kohm Unbalanced,30kohm Balanced
Input Impedance 15kohm Unbalanced,30kohm Balanced
Input Impedance 15kohm Unbalanced,30kohm Balanced
Input Clipping 10Vrms(22dBu)
Input Clipping 10Vrms(22dBu)
Input Clipping 10Vrms(22dBu)
Cooling Continuously variable speed, fan forced air
Cooling Continuously variable speed, fan forced air
Cooling Continuously variable speed, fan forced air
Connectors (each channel)
Input: RCA unbalanced and1/4”(6.3mm)TRS, balanced
Input: RCA unbalanced and1/4”(6.3mm)TRS, balanced
Input: RCA unbalanced and1/4”(6.3mm)TRS, balanced
Output: 5-way Binding post and 1/4” Phone
Output: 5-way Binding post and 1/4” Phone
Output: 5-way Binding post and 1/4” Phone
Controls AC power switch,Channel 1 and 2 volume
Controls AC power switch,Channel 1 and 2 volume
Controls AC power switch,Channel 1 and 2 volume
Indicators Power on(blue),Protection(amber)
Indicators Power on(blue),Protection(amber)
Indicators Power on(blue),Protection(amber)
Signal(green) for each Ch.,Peak(red) for each Ch.
Signal(green) for each Ch.,Peak(red) for each Ch.
Signal(green) for each Ch.,Peak(red) for each Ch.
Level: , -24 dB, -20 dB, -16 dB, -12 dB, -8 dB, -4 dB, -2 dB. O, +2 dB and +4 dB
Level: , -24 dB, -20 dB, -16 dB, -12 dB, -8 dB, -4 dB, -2 dB. O, +2 dB and +4 dB
Level: , -24 dB, -20 dB, -16 dB, -12 dB, -8 dB, -4 dB, -2 dB. O, +2 dB and +4 dB
(PEAK).
Protection Short circuit,Thermal,Current limit,DC offset,Current inrush,RF
Protection Short circuit,Thermal,Current limit,DC offset,Current inrush,RF
Protection Short circuit,Thermal,Current limit,DC offset,Current inrush,RF
protection, Turn on/Turn off muting
Power Requirements 115/230,240VAC,50/60Hz
Power Requirements 115/230,240VAC,50/60Hz
Power Requirements 115/230,240VAC,50/60Hz
Dimensions(WXHXD) 19”(483mm)X3.5”(89mm)X11.7”(297mm)
Dimensions(WXHXD) 19”(483mm)X3.5”(89mm)X11.7”(297mm)
Dimensions(WXHXD) 19”(483mm)X3.5”(89mm)X11.7”(297mm)
Net Weight 15 lbs 6.82 kg 20 lbs 9.09 kg 24 lbs 10.91 kg
Net Weight 15 lbs 6.82 kg 20 lbs 9.09 kg 24 lbs 10.91 kg
Net Weight 15 lbs 6.82 kg 20 lbs 9.09 kg 24 lbs 10.91 kg
11
Appendix A: Power Output vs. THD
0
1
0.05
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
0.5
0.55
0.6
0.65
0.7
0.75
0.8
0.85
0.9
0.95
0
125
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
105
110
115
120
10 50k20 50 100 200 500 1k 2k 5k 10k 20k


THD %
Servo 600
Servo 300
Servo 200
12
Appendix B: Frequency Response
Linearity (0 dB Ref) vs. Frequency sweep
10 Hz - 50 kHz Typical for all Servo models
5.0000
4.0000
3.0000
2.0000
1.0000
0.0
-1.000
-2.000
-3.000
-4.000
-5.000
10
100
1k
10k
50k
Ap
AUDIO PRECISION Servo 600 LEVEL (dBr) vs FREQ (Hz)
0dB ref
Samson Technologies Corp.
575 Underhill Blvd.
P.O. Box 9031
Syosset, NY 11791-9031
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 516-364-3888
www.samsontech.com
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson SERVO 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson SERVO 600 in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info