629988

Samson S4000 Manual

25
Zoom out
Zoom in
Previous page
1/32
Next page
25
S4000 • Powered Mixer
Input and Output Connections
The S4000 mixer has 20 mono mic/line and stereo line input channels, for connecting a variety
of signal sources from microphones to line level devices such as synthesizers, drum machines and
direct boxes.
Channel 1-12 Mono Mic/Line Inputs
The mono mic/line inputs each have a LINE level input, a MIC level input and an Insert connector
for effects.
A. MIC (Microphone) Input - Use these inputs to connect Low Impedance micro-
phones and low-level signals from direct boxes. The MIC inputs have a nom-
inal operating level of –50dBV through -20dBV. The MIC inputs also feature
+48V phantom power, allowing you to use condenser microphones. The
Phantom Power is switched on/off simultaneously for channels 1 through 12.
B. LINE (Line Level) Input - Use these inputs to connect high impedance micro-
phones, synthesizers and drum machines. The LINE inputs have a nominal
operating level of -40dBV through - 10dBV.
NOTE: It is not possible to simultaneously use both the LINE and MIC inputs
on the same channel. For each channel, use only one of the inputs as appropriate for the
input source.
C. INSERT (Send and Return) jack - The S4000 have a ¼", TRS (TIP/RING/SLEEVE) Insert jack
for connecting outboard effects processors directly on the channel input. The signal is sent
on the tip (the Send) and returns on the ring (the Return) of the connector.
Channel 13-20 Stereo Input Channels
The stereo input channels are used for connecting stereo signals like those from CD or MP3
players, electronic keyboards, drum machines and other line level signals.
D. Stereo Inputs (RCA jacks) - The stereo channel's RCA
connectors accept signals from stereo line devices. The
RCA line level inputs have a nominal operating level of
-40dBV through - 10dBV.
E. Stereo Inputs (¼" jacks) - Use the ¼" jacks for connect-
ing stereo line level sources. For stereo inputs use the
LINE L to connect the left channel and the LINE R to
connect the right channel. Use these inputs to connect
high impedance microphones, synthesizers and drum
machines. The LINE inputs have a nominal operating
level of -40dBV through - 10dBV.
CD/TAPE IN and RECORD OUT
You can interface a digital recorder, computer sound card or other recorders using the S4000’s
CD/TAPE and RECORD OUT.
F. CD/TAPE Inputs (RCA jacks) - Stereo line level input, on RCA connectors, for connecting the
output of devices such as MP3, CD, computer sound-card, or any other line level device.
G. Record Out (RCA jacks) - The signal present at this connector is the MAIN bus signal before
it has passed through the MASTER level control and graphic equalizer. The nominal output
level is -10dBV and the impedance is 100 Ohms.
D F G
E
A
B
C
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson S4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson S4000 in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info