629774
13
Zoom out
Zoom in
Previous page
1/20
Next page
13RSX Passive Loudspeakers
Using an External Crossover
The RSX118S features an 6dB/octave at 150Hz internal low pass filter, which means that
frequencies will be reduced 6dB in level every time the frequency doubles. Consequently, fre-
quencies that are in the range of the satellite speakers will be produced by the subwoofer and
can create comb filtering. When configuring your sound system, you may want to use an exter-
nal crossover, like the Samson S 3-way, to fine tune the crossover frequency and incorporate
the subwoofer with the full-range speakers, as well as to match the room where the system is
installed. The goal is to seamlessly integrate the subwoofer with rest of your speakers to extend
the frequency range of your system, rather than to produce an unnatural, boomy mix. You do
not want the subwoofer and the main speaker to reproduce the same frequencies, as this will
create duplication of low frequencies, and create an imbalanced mix.
A good place to start is to use the frequency response of your speaker cabinets. You can usually
find this information in the documentation included with your speakers. Start by setting your
crossover frequency to the lowest frequency that your satellite speaker produces.
If your satellite speakers are large (12" or 15") start with a crossover frequency of 80Hz. If
your speakers are small (8” or 10”) start with a crossover frequency of 100Hz. If you have an
oscillator (there are many free oscillator smartphone and tablet apps available), slowly sweep
from 400Hz down to 40Hz, and listen to how the subwoofer and speakers blend together. You
may need to raise or lower the crossover frequency control to create the smoothest frequency
response. If you do not have an oscillator, use music tracks that have a steady bass line and
kick drum. Slowly adjust the crossover frequency until you find the optimum setting.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson RSX215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson RSX215 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info