629768
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
Positioning RSX Loudspeakers
Avoiding Feedback
Feedback is the annoying howling and squealing that can heard when the microphone picks up sound
from the speaker. The sound is then re-amplified back through the speaker again, creating a feedback
loop. Follow these steps to minimize the likelihood of feedback:
Avoid pointing microphones directly at the speaker. In general it is recommended that the micro-
phone be positioned behind the speaker enclosure. This uses the directional characteristics of the
speaker and microphone to your advantage.
Keep the microphone as far from the speaker as possible. This will help achieve isolation between
the speaker and the microphone, and allow you to increase the output of the RSXLoudspeaker.
Position the microphone as close to the sound source as possible. This will enable the microphone
to pick up more direct sound, and allow you to reduce the microphone input gain control.
Reduce the overall level of the speaker.
Positioning the RSXM10a/RSXM12a Floor Monitors
The RSXM10a/RSXM12aspeakersare ideal solutions for
stage monitoring thanks to its uniquecompact,low-profile
design. In a large stagemonitor system, several speakers
can be daisy-chainedtogether using the Line Output.
When positioning themonitor, be mindful of the placement
of your microphonesto help reduce feedback problems.
It’s a really good idea toknow your microphone’s pick up
pattern to choose the rightspot. Some microphones, like
super and hyper-cardioidmodels, offer a lot of rejection in
the rear of their pick uppattern and when the RSXM10a/
RSXM12a is positioned at the sameangle as the rejection,
you can set the monitor a lot louderbefore it feeds
back. In many instances you may choose to
use anexternal equalizer to increasethe
volume and reduce the chance of
feedback.
When using the RSXM10a and
RSXM12a on a speaker stand, it is
recommended to set the MONITOR/FOH
switch in the MONITOR position for optimal
frequency response.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson RSX115a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson RSX115a in the language / languages: English as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info