629768
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
1. XLR and ¼” Input Connector (Input 1) - This combo
XLR and ¼” connector accepts either a balanced
or unbalanced microphone or line level signal.
The ¼” phone input accepts TS or TRS type
connectors.
2. VOL Control (Input 1) - This Volume knob adjusts
the level of the Input 1 channel.
3. Mic/Line Switch (Input 1) - The MIC position
changes the gain of the Input 1 jacks to MIC
level. The LINE position reduces the gain of both
jacks by 30dB to line level.
4. XLR and ¼” Input Connector (Input 2) - This combo
XLR and ¼” connector accepts either a balanced
or unbalanced line level signal. The ¼” phone
input accepts TS or TRS type connectors.
5. VOL Control (Input 2) - This control adjusts the
level of the Input 2 channel.
6. STATUS Indicator - This bi-color LED lights
GREEN when signal is present at the inputs,
regardless of the input volume control settings.
The indicator lights RED when the amp is near
the clipping point and the limiter is engaged.
If the LIMITER indicator lights frequently, turn
down the INPUT volume controls on the speaker
or turn down the signal at the source, until the
indicator does not light anymore, or lights only
occasionally with high signal peaks.
7. POWER Indicator - The POWER LED lights
indicating that the main POWER switch is on.
8. DSP PRESET - The RSX DSP has three EQ contour
curves: FLAT, BOOST, and VOCAL. The FLAT
setting produces the standard frequency response
and works best for most applications. The BOOST
setting enhances low frequencies to add punch
and high frequencies to add vocal clarity. The
VOCAL setting provides a high frequency lift
for vocal clarity. This is useful when plugging a
microphone directly into the speaker.
9. FRONT LED Switch- When set to the ON position,
the front power LED will illuminate when the
Power LED switch is set to the ON position. When
the switch is in the OFF position, the Front Power
LED will not illuminate.
RSX112a & RSX115a Rear Panel Layout
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson RSX115a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson RSX115a in the language / languages: English as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info