629773
8
Zoom out
Zoom in
Previous page
1/20
Next page
8
Input Connections
The RSX jack plates feature parallel speaker connectors. This enables you to directly connect an
extension cabinet to an RSX speaker.
Only use one ¼" or Speakon® connector as an input connector from an amplifier. Typically,
you will only connect a single extension cabinet to an RSX cabinet, but it is possible to daisy-
chain multiple cabinets. When wiring multiple cabinets in parallel, attention must be paid to
the overall impedance of the loudspeaker system, and the minimum load impedance of the
amplifier. Please see the chart below for typical impedance calculations for multiple speaker
arrangements.
Typical Impedance Calculations
16Ω + 16Ω =
+ 16Ω = 5.3Ω
+ =
+ 16Ω + 16Ω =
16Ω + 16Ω + 16Ω + 16Ω =
+ = 2.7Ω
+ =
It is recommended, especially for installation applications, to use Speakon® style connectors
because they lock into jacks providing a secure connection, are able to handle high current, and
the contacts do not cause a momentary short when connecting to an amplifier or speaker cabi-
net.
INPUT
INPUT
OUTPUT
When speakers are connected in parallel, the impedance is reduced. The formula to calculate
the total impedance of your speaker system is:
1/R
t
= 1/R
1
+ 1/R
2
+ 1/R
3
+ … 1/R
n
where “R” is the impedance of a speaker cabinet.
If all speakers have the same impedance, the total impedance will be equal to the impedance of
a single speaker divided by the total number of speakers. For example, if you have two 4 Ohm
speakers connected in parallel, the total impedance is 4 divided by 2, or 2 Ohms. You must
be careful when connecting speakers in parallel to an amplifier. The impedance can quickly
fall below safe levels. This is especially true when connecting speakers in parallel to a bridged
amplifier.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson RSX115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson RSX115 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info