629738
9
Zoom out
Zoom in
Previous page
1/16
Next page
7
Positioning the Resound HD
Microphone Positioning - How to Reduce Feedback
Feedback is the annoying howling and squealing that is heard when the micro-
phone gets too close to the speaker and the volume is high. You get feedback
when the microphone picks up the amplified signal from the speaker, and then
amplifies through the speaker again, and then picks it up again, and so on and
so on. In general, it is always recommended that any LIVE mic (a mic that’s on)
is positioned behind the speaker enclosures. This will give you the best level
from your system before feedback. One possible exception is when you are
adjusting the sounds of the microphones, since you want to listen in front of
the speaker to hear properly. To do this, lower the MAIN VOLUME while setting
the EQ and effect from in front of the speakers. Once you have the sound you
like, move the microphones to behind the speakers and raise the Main volume.
Speaker Placement
Whenever possible, it is a good idea to raise the speakers above the heads of
the listening audience. The Resound HD enclosure features a standard 1 3/8”
pole mount receptacle, which is compatible with speaker stands from a variety
of manufacturers.
Using the Resound HD as a Floor Monitor
The Resound HD RS10mHD, RS12mHD and RS15mHD are ideal solutions for
stage monitoring. The RS15mHD features a wide dispersion pattern and is
configured with a 30 degree angle making them ideal for electronic drum
and keyboard monitors as well as vocal moni-
tors. In a large stage monitor system, several
Resound HD’s can be daisy-chained together
using the EXTENSION SPEAKER output.
Note:
Be sure to check the manufacturers
minimum recommended impedance for your
power amplifier to avoid overload and possi-
ble damage to both the speaker and amplifier.
In many instances when using the Resound
HD as a monitor system, you may choose to
use an external equalizer like the Samson S
Curve 131 to increase the volume and reduce
the chance of feedback.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson RS215HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson RS215HD in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info