630017

Samson Resolv A8 Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
Operating the Resolv A Series
Resolv A Series Control Panel - continued
HIGH FREQUENCY LEVEL CONTROL
The four-position High Frequency Level control switch is used to adjust the monitor's high-frequency
response, providing four equalization curves to select from. By using the High Frequency Level con-
trol, the Resolv A Series’ high frequency response is adjusted with the application of a high-end tilt
(equalization circuit) centered at 12kHz, with selectable levels of –3dB, 0dB (flat), + 3dB and +6dB. You’ll
find that the change is very subtle. Many mix engineers prefer the sound of near field monitors with a
little lift in the high frequency response, some like more focus on the midrange, and therefore, desire
a flatter or rolled off high frequency response. The best way to set the controls is what sounds good to
you. Therefore, you should experiment with the various settings to find the combination of the High
Frequency Level and Volume controls you like. To do this, play several CD’s of music that you are familiar
with. Remember, if you think you’re getting lost, the Resolv A Series is flat when the High Frequency Level
control is set to the “0” position.
VOLUME CONTROL
The volume control is used to adjust the
overall output level of the Resolv A Series.
When operating the unit for the first time,
start with the volume control set all the
way off. Slowly raise the Volume control
to reach a comfortable listening level.
The Ins and The Outs
The Resolv A Series features a full comple-
ment of input connectors providing easy
installation with a variety of audio devices
like recording consoles, hard disk record-
ers, CD players and computer sound
cards, to name a few. The following sec-
tion details the Resolv A Series's input
connectors. In addition, there is a detailed
cable-wiring diagram on page 12.
BALANCED XLR AUDIO INPUT (A6 and
A8 only) - The Resolv A Series features a
female XLR connector that will accept bal-
anced or unbalanced +4dBU line level sig-
nal. If you are using a mixer that has bal-
anced outputs on XLR connectors, you can make the connections via standard XLR (microphone) cable.
1/4-INCH PHONE AUDIO INPUT – A balanced TRS (Tip, Ring, Sleeve) 1/4-inch phone plug is used to con-
nect balanced or unbalanced line level signals. The 1/4-inch input is a switching jack, so when a 1/4-inch
connector is inserted into the jack, the RCA and/or XLR inputs are switched off and the 1/4-inch input
is switched on. This provides a convenient patch-point for quick insertion of a secondary input signal
source for testing or expanded operation.
RCA AUDIO INPUT – The RCA input accepts unbalanced signals used to connect signals from unbal-
anced –10dBV devices.
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
10
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Resolv A8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Resolv A8 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info