630015
11
Zoom out
Zoom in
Previous page
1/16
Next page
Operating the Resolv A Series
Resolv A Series Control Panel
The Resolv A Series rear control panels are where you will make your connections for both AC power and
audio signals. The rear panel also contains the controls to make adjustments to the overall volume and
frequency response curve. The following section details the rear panel controls and connections.
Powering the Resolv A Series
Since the Resolv A Series are active studio monitors with an on-board power amplifier and electronic
crossover, it is necessary to connect the unit to an AC power supply. Make sure that the main Power
switch is set to the OFF position and connect the supplied IEC power cable into the AC inlet.
Things that go Hum!
When running power cables, be careful not to run the AC power cords or AC extension cords in paral-
lel to your input cables. This will help reduce any AC hum that can be picked up. If your have to cross
an AC line with an audio line, try to
cross them at a 90 degree angle for
the least amount of induced hum.
Using the Resolv A Series balanced
input connectors will greatly protect
against the induced hum thanks to
the common mode rejection (the
induced hum is phase canceled) that
it's balanced input circuit provides.
POWER SWITCHThe POWER
switch is used to turn on the Resolv
A Series active electronics. When set
to the ON position, the front panel
LED will illuminate red, indicating the
Resolv A Series is powered up and
ready for operation.
AC INLET - Connect the supplied IEC
power cable here.
The Resolv A Series's rear panel
provides two important controls for
adjusting the overall sound of the
monitor, High Frequency Level and
Volume. Eventually, you will adjust
these controls to your preferable
position and set it and forget it”.
That’s assuming that the monitors
remain in the same spot, in the same studio. If you take your monitors to other studios you may find the
controls extremely useful in adjusting the sound for the new room.
1
2
1
2
3
4
5
6
7
1
2
3
4
5
6
7
9
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Resolv A5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Resolv A5 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info