629799

Samson MXS3000 Manual

10
Zoom out
Zoom in
Previous page
1/60
Next page
10
Bridge and Parallel Modes
The MXS amplifiers provide a rear-panel
switch that allows it to be used in either
a Bridge or Parallel mode. When this
switch is placed in the STEREO position,
the MXS amplifier functions as a true
stereo amplifier, where both of the two
independent amplifier channels (Ch A and
Ch B) can receive different input signals
and produce independent output signals.
However, when the switch is placed in the
BRIDGE position, the Ch A input signal is
routed to both power amplifiers bridged
together, producing a single output signal.
The illustration on the left shows how
this works. In Bridge mode, the polarity
(phase) of the Ch B output signal is reversed
relative to that of the Ch A output signal.
Both channels then process the same input
signal, with the speaker load connected so
that power is derived from both channels.
The effective voltage swing seen by the load
is thus doubled, so that the power output is
multiplied by four.
When using the binding post outputs in
Bridge mode, be sure to connect your
loudspeaker with the red (+) terminal of the
Ch A output connected to the positive input
of the speaker and the red (+) terminal of
the Ch B output connected to the negative
input of the speaker. Do not use the black
ground (-) output terminal of either channel.
You can also use an Speakon® connector,
plugged into the CH A output, wired +1 for
the positive input of the speaker and +2 for
the negative input of the speaker.
When the rear panel switch is placed in
the PARALLEL position, the MXS amplifier
operates in an input parallel mode. In this
mode, only the signal present at the Ch A
input is used. This signal is then routed to
both the Ch A and Ch B power amplifiers,
thus producing a dual mono output.
INPUT
Bridge Mode
CHANNEL
1(+) OUTPUT
CHANNEL
2(+) OUTPUT
Bridge Wiring
+1 +2 Connected
1- 1+
2+ 2-
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson MXS3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson MXS3000 in the language / languages: German, French, Italian, Spanish as an attachment in your email.

The manual is 9,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samson MXS3000

Samson MXS3000 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info