629655
17
Zoom out
Zoom in
Previous page
1/112
Next page
17
MXP144/MXP144FX
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
Top Panel Controls
42. POWER Indicator - The POWER LED lights up to
indicate that the main POWER switch (located on the
rear panel) is on.
43. Output Level Meter - The output level meter allows you
to monitor the level of the signal, which is being sent
to the MAIN MIX jacks.
NOTE: To avoid distortion, adjust the MAIN MIX level
control so that the 0 indicator LED lights occasionally.
44. PHANTOM Power Switch and Indicator - The mixer
features an on-board, 48-Volt Phantom power supply
to operate condenser microphones. When the switch
is engaged, the LED will illuminate indicating that
phantom power is now available at the microphone
preamps.
IMPORTANT NOTE: To avoid a loud pop, be sure to
turn down the master level controls before plugging
and unplugging the mic cables when the phantom
power is active. Be sure the MAIN level fader is turned
all the way down before activating the Phantom Power
to prevent pops from entering any external device
connected to the mixer. Also, be sure the Phantom
Power is OFF when connecting or disconnecting
microphones.
45. TAPE & USB (MXP144FX only) TO MIX 2 + PHONES
- This switch is used to assign the TAPE and USB
(MXP144FX only) inputs to the MIX 2 and PHONES
outputs.
46. TAPE & USB (MXP144FX only) TO MAIN MIX - This switch
is used to assign the TAPE and USB (MXP144FX only)
inputs to the MAN MIX output.
47. USB RETURN (MXP144FX only) and TAPE IN
Control - This level control is used to adjust the volume of the signal
returning from a computer via the USB input (MXP144FX only) and audio
connected to the TAPE IN RCA jacks.
48. MIX2/PHONES Control - The mixer has a second set of output connectors
carrying a duplicate of the MAIN MIX signal for the purpose of feeding
another speaker zone or recorder. The MIX 2/PHONES control knob is
used to set the volume of the MIX 2 output and the overall level of the
Headphone output.
49. MAIN MIX Fader - The MAIN MIX Level fader adjusts the level of main
left and right stereo mix sent to the MAIN MIX outputs.
42
43
44
45
46
47
48
49
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson MXP144 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson MXP144 in the language / languages: English as an attachment in your email.

The manual is 9,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info