23501
22
Zoom out
Zoom in
Previous page
1/28
Next page
18
PLAYING BACK A CD USING 2T TO MIX
The MDR1248 and MDR1688 has a dedicated input for
playing back a stereo device such as a CD, Tape or Mini
Disk. Below is a description of how you can play back
a CD, Tape or MD using the MDR1248 and MDR1688’s 2
TRACK INPUT.
1. Turn the MAIN level control all the way down.
2. Press the 2TK TO MIX button down.
3. Adjust the MAIN LEVEL control in the master section
to the "0" position.
4. Start playback on the CD, Tape or MD player, and use
the 2 TK LEVEL control to set the desired level.
RECORDING A MIX FROM THE MDR1248 and
MDR1688
You can record the audio from the MDR1248 and
MDR1688’s mixer section including the MIC, LINE, 2T IN
and AUX inputs to a Cassette deck, MD, DAT or any other
type of recorder using the 2T OUT outputs. Simply con-
nect the MDR1248 and MDR1688’s 2 TRACK OUT to the
input jacks of the recorder as shown in the diagram on
the right and follow the steps below.
1. Adjust the MAIN LEVEL control in the master sec-
tion to the "0" position.
2. Set a clean signal using the recorder’s input level
controls and meters.
3. Press RECORD.
4. Play back using as described in the previous section
"PLAYING BACK A CD USING 2T TO MIX".
NOTE: To avoid feedback, be sure to keep the 2TK LEVEL
control knob all the way down while recording with the
2TK outputs.
Operating the MDR1248 and MDR1688
USING AN EXTERNAL EFFECT
If you prefer to use an external device for effects process-
ing, you can easily connect the unit using the MDR1248
and MDR1688 AUX 2 bus. Follow the simple steps below
to interface your processor:
1. Connect the AUX 2 OUTPUT to the input of the
external effect processor.
2. Connect the outputs of the effect processor to
the AUX 2 RETURN located on the MDR1248 and
MDR1688’s master section.
3. Set the MAIN LEVEL control to the "0" position.
4. Raise the AUX 2 knobs for the channels to which you
want the external effect to be applied.
5. Set the input level of the external effect so that the
sound is not distorted and so that the effects input
meter does not indicate a clipped signal.
6. Use the AUX RETURN 2 control to adjust the level of
the effects processed by the external effects device.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson MDR1688 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson MDR1688 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samson MDR1688

Samson MDR1688 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info